Jump to content
SAU Community

Recommended Posts

hi guys,

every week there is a new thread asking about GCG hi flows vs HKS GTseries bolt on upgrades for 33's.

I myself went the HKS, but still strongly considered the GCG.

I thought it would be interesting if we get a few cars together with the above mentioned upgrades and do some road tests, as i think it would be great to put them side by side and compare lag vs top end etc.

Mainly im interested in seeing them side by side rolling runs from 2nd, 3rd, 4th etc.

Id also be keen to go for a ride in a GCG hiflow fitted 33 for seat of pants comparison.

Would anyone be interested in getting together for this?

Link to comment
https://www.sau.com.au/forums/topic/42013-hksgt-head-to-head-with-gcg-h-flow/
Share on other sites

I'd love to see the turbo swapped on the same R33 GTS-t rather than 2 different cars with diff engines and mods etc with dyno runs done. Quite difficult/expensive to do I know...

I wonder if GCG themselves would like to do it on a car for a day, imagine the sales they would generate if they put aside a day to do this.

Shouldn't be too hard if you compare an HKS GT3040 vs. Garrett GT30 (GCG) on an R33 GTS-t with a high mount manifold.

But this isn't indicative of other turbo pairings though... You'd have to compare them all doing a straight swap on the same car to get a definitive comparison.

yeah ive thought about that too in order to do a critical comparison, but for real world comparison each person is going to have a diferent tuner anyways. Im not talking so much about power but more how they drive. Also it should be easier to get a group of cars together than to find someone who wants to swap their HKS for a GCG or vice versa.

yeah ive thought about that too in order to do a critical comparison, but for real world comparison each person is going to have a diferent tuner anyways.  Im not talking so much about power but more how they drive.  Also it should be easier to get a group of cars together than to find someone who wants to swap their HKS for a GCG or vice versa.

If you compare two different cars for the aim of having an honest comparison about the turbos, you HAVE to factor in all the other differing mods done to the cars. Hell, something as small as one person having new APEXi pods and the other one dirty HKS pods can produce as much as 5rwkw difference, let alone cams, throttle bodies, head work, ECU tuning, engine compression, etc etc etc...

Those kinds of comparisons are fine for good fun (like we're doing down in Melbourne in a few months re: GTR low mount turbo choices), but it's hardly a scientific comparison.

word up, should be an awesome comparsion. i hear heaps that the 2530 is too small for rb25 and that gcg 450hp highflow is sweet, but ive also heard gcg hiflow isnt as good (MRK-25T ??). I'd love to see a mod list from a few cars that have both so we can see what gets what. should be a great topic

For the power you have around (227rwkw wasnt it) wasnt your 1/4 mile around the 13.0 @113???  If it was that is very impressive !!!
According to my website it is 13.0@113mph with a 2.3 60ft, so he has easy 12.7's waiting for him with a decent launch :)

Don't think i'm invited, rb20 with stage 2 gcg highflow. It brings new meaning to the term laggy :)

boost curve is something like:

2000rpm 0psi

2500rpm 0psi

3000rpm 1psi

3500rpm 3psi

4000rpm 6psi

4200rpm 12psi :(

i only run 12psi atm until the new injectors go in next month and the car gets a tune

makes 173rwkw atm

  • 1 year later...

if it was a joke he wouldnt have asked. justin a highflow is they get your stock turbo change the compressor wheel and ball bearing pack and new exhaust wheel. it enables it to flow more and run more pressure through it as its a better/stronger compressor wheel and the bearings are new. you keep the same size/housing so it bolts back up and you dont have to change anyting.

just take off, send away, get it back, put it back on and you can turn up the boost more. the 2540 is a mismatched turbo so either 2530 or 2535 or gt-rs. search on 2540 and lag. youll find heaps of threads covering the 2540 being extra laggy due to a mismatch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...