Jump to content
SAU Community

Recommended Posts

Hello,

I have a '99 R34 GTT, its stock apart from coilovers and a pod filter at the moment. I had the joy of being able to have the track to myself and some friends the other day. While going around the track i was wondering, How far can i push the car before things will start going wrong?

Like holding it at high revs and sticking in turbo, and such how well do the stock engines hold up?

Cheers, Zac

Link to comment
https://www.sau.com.au/forums/topic/420335-stock-r34-gtt-engine-limitations/
Share on other sites

Fit a decent oil temperature and/or coolant temperature gauge. If the oil heads up to 120°C, it's time to call it off. If the coolant is up over 100°C, also time to call it off.

As long as the thing stays cool and you keep the oil filled up and the fuel tank above half full, you should be able to cane the engine for longer than you can handle before it will die.

Having said that, brakes and tyres usually go off on the track before anything else mechanical will suffer. Street pads don't handle continuous hard use.

Fit a decent oil temperature and/or coolant temperature gauge. If the oil heads up to 120°C, it's time to call it off. If the coolant is up over 100°C, also time to call it off.

As long as the thing stays cool and you keep the oil filled up and the fuel tank above half full, you should be able to cane the engine for longer than you can handle before it will die.

Having said that, brakes and tyres usually go off on the track before anything else mechanical will suffer. Street pads don't handle continuous hard use.

That's awesome, everything stayed really cool on the track. Although i wasn't going as hard as i could have been by the sounds of it.

I did notice my brakes weren't the greatest on the track, they're the next thing to replace on my list.

I've always been told about horror stories of pistons going through the block and such, and to be honest it scared the shit out of me. Next time i'll give it a tiny bit more then

That's awesome, everything stayed really cool on the track. Although i wasn't going as hard as i could have been by the sounds of it.

I did notice my brakes weren't the greatest on the track, they're the next thing to replace on my list.

I've always been told about horror stories of pistons going through the block and such, and to be honest it scared the shit out of me. Next time i'll give it a tiny bit more then

If your not limiter bashing there should be next to no chance of engine damage unless like has been said your hitting high oil or coolant temps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...