Jump to content
SAU Community

Recommended Posts

Regarding what car was just used in 2F2F, it was a R34 GTT with GTR bodykit. The behind the scenes docos confirm this as. A real GTR may have been used for stationary shots etc, but Paul Walker's character definitely drove a GTT without question,

Regarding what car was just used in 2F2F, it was a R34 GTT with GTR bodykit. The behind the scenes docos confirm this as. A real GTR may have been used for stationary shots etc, but Paul Walker's character definitely drove a GTT without question,

Hey Kevin, the link you have posted is to a thread about the 4th film 'Fast and Furious' ,hence the thread title. Furthermore it reiterates this in the article: "This R34 started its life as a GTT rear wheel drive platform and was then recruited to become a stunt double for the hero car for the Fast and Furious 4 movie".

Several people on Gtroc have been told directly by Andy Middlehurst that two UKDM BNR34s were purchased by the producers of 2 Fast 2 Furious for the the film.

In the Fourth film i know Gtts were used as stunt cars ( as R34 Gtrs are nearly impossible to get in the US, and as such are too valuable to be smashed up), however, the original Hero car was in fact a Genuine r34gtr (albeit a 'Kaizo' car) and in the second film 2F2F , which is the topic of discussion, the Hero car was again a Genuine R34gtr. I would not be at all surprised if Gtts were also used as stunt cars for this film, however,for all intents and purposes the car was meant to be/ is a gtr, so what replica they used for stunts or scenes where the car gets damaged is irrelevant

Cheers

Edited by the spruce moose

Hey Kyle,

I get it mate,

Almost everyone gets the inclination for decals on their Skyline at some point.

I little while ago I got quotes for a Monster claw across my bonnet, for $1000 and seriously considered it and still am.

I like my music and might start a website soon streaming funk so see my skirts.

Anyway, decals are an opportunity for uniqueness, so go for it.

post-25026-0-51048300-1378633370_thumb.jpg

it was meant to be a 34R however as they had to trash a whole bunch of them they just used GT / GTT's and pretended except for 1 car

someone posted a pic of all the mangled cars on here aaaaages ago

also, who gives a shit? it was a terrible movie anyway

Stop stirring people on with your obvious and do liberate stupidity.

If you're so obsessed and determined with getting those original F&F decals then why have you not posted any pictures yet?

You're just a troller. Pathetic.

Mate are you kidding? I posted the photo like last week, read the comments, idk why it was removed from my post.

Repost:

post-107270-0-11986500-1378645383_thumb.jpg

Hi Kyle, I respect the fact you went ahead with what you wanted to do on your car regardless of what people say. I like that. Each to their own. As long as you like it, who care what people say.

Cheers

hey not bad kyle.

Drop it on its guts and get 19 inch rims and your done.

keep up the good work

attachicon.gif1150363_10200586858699179_273900282_n.jpg

hahhaha loving the edit, i wish i could buy better rims, the chromes came with when i bought the skyline, i just dont have 1k+ to spend on rims, being an apprentice mechanic the wage sucks

Hi Kyle, I respect the fact you went ahead with what you wanted to do on your car regardless of what people say. I like that. Each to their own. As long as you like it, who care what people say.

Cheers

Thankyou, appreciate it.

I was parked in a car park the other day and a guy was driving out and he actually stopped his car in the middle of the car park and got out to take a photo.

hahhaha loving the edit, i wish i could buy better rims, the chromes came with when i bought the skyline, i just dont have 1k+ to spend on rims, being an apprentice mechanic the wage sucks

Thankyou, appreciate it.

I was parked in a car park the other day and a guy was driving out and he actually stopped his car in the middle of the car park and got out to take a photo.

i personally only take photos of shocking cars...

on the rims, buy second hand. plenty out there for 300 bucks!

hahhaha loving the edit, i wish i could buy better rims, the chromes came with when i bought the skyline, i just dont have 1k+ to spend on rims, being an apprentice mechanic the wage sucks

 

Mechanic? Cut the springs to sit it on it's rims. Done in an hour.

Mechanic? Cut the springs to sit it on it's rims. Done in an hour.

cutting springs never works out, they dont sit right and shit just starts to happen to the ride, had someone do it on a golf before and when you went full lock it started to click

Just saying. Cheap option and works well if you take one coil out and make sure it lines up properly. Did it to a few of my cars, no issues. Sometimes needed to clamp the spring on the strut to stop it moving around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...