Jump to content
SAU Community

Recommended Posts

If you're an AutoGlym fan and there aren't many detractors, you can firstly use their Super Resin Polish.

If that doesn't remove them, you can try their more abrasive Paint Renovator followed by Super Resin Polish

Meguiar's has their Ultimate Compound followed by their Showcar Glaze 7

Menzerna has a broad spectrum of polish grades.

Have used AutoGlym. It's watery garbage.

Try http://www.poorboysworld.com/.

Depending how how bad the swirl marks are use http://www.poorboysworld.com/professional-polish.htm if they are light or if you need a bit more ommph use the http://www.poorboysworld.com/pro-polish-2.htm followed by the first product I listed. Seal it then wax it. Great stuff that poorboys gear is.

When a product is watery, the emulsion has broken down because the emulsifiers cannot keep the watery component suspended in the oil component or vice versa.

It's likely, that if the product has gone watery, it has endured extended heat - probably even before you bought it.

And the instruction to shake a polish etc, may certainly be not enough to reform the emulsion.

This aspect intrigued me so greatly that I felt compelled at the Meguiar's Tech Night last Thur to ask if their products have a Use-By Date.

You've used that poorboysworld stuff Paul?

What happened was I had parked under tree and it started raining.

Then when I went back to my car it has sap all over it so I went and washed it then noticed afterwards that somehow I'd created swirl and spiderwebs, looks terrible on white aswell..

You've used that poorboysworld stuff Paul?

What happened was I had parked under tree and it started raining.

Then when I went back to my car it has sap all over it so I went and washed it then noticed afterwards that somehow I'd created swirl and spiderwebs, looks terrible on white aswell..

It's all I use mate. If you're in Sydney, feel free to come around and try some.
  • 5 weeks later...

i have been a car detailer for the last 3 years and i find the best product for swirl remover is the poorboys range...... they have a product called SSR (scrath and swirl remover) 2.5 and thats the best one i have found used with a good quality waffle pad and slow speed on the buff...... you can buy the product from http://www.waxit.com.au/index.php?option=com_virtuemart&page=shop.browse&manufacturer_id=21&Itemid=1

also if your not too keen on using that stuff poorboys also make a product called white diamond....... works wonders if ur car is a light color...... if its dark use black hole........ they are both the same product but one is for light colors and one is for dark........ these are also available from the same website....... if u need anymore help pm me......

Edited by 92r32gts

Hey man thanks for that I got poor boys stuff coming in mail I got the ssr1,exp,polish hope they do the trick haha, do u think I should use a machine buffer? Or can I do it by hand.

Oh we're you located? I'm perth

Regards

Thomas

Edited by Turbo tommy

You need a machine for any decent swirl removal. Can be done by hand but will take forever and your arms will probably fall off after one panel...

I've never tried the Poorboys gear but hear very good things about it. If you have the cash, get a random orbital machine and some decent foam pads, then jump on youtube for how to videos. Junkman2000 has an awesome 5 part tutorial for beginners, very clear and easy to follow, his channel is here: http://www.youtube.com/user/Junkman2000

  • 2 weeks later...

+1 for the poorboys. I use the ssr 2.5 followed by the ssr1 and a random orbital with the orange foam pad for the 2.5 then a white pad for the 1 and let the machine do all the work don't use a lot of pressure. Finish it with the white diamond like 92r32gts said.

You's are mad lads cheers for the help, although it's been raining non stop here in Perth and I can't even clean it haha, I also got a quote from someone to do the job quote was around 900$ for the car I told him to stick it lol

$900 is pretty nuts, that would be a full on top end job. Justified for some cars of course, but you would be better off getting some good gear and learning to do it yourself. Plus, you can make some extra scratch on the side by doing the odd car here and there for friends and family

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...