Jump to content
SAU Community

M35 Blown Turbo?

baymanx

By baymanx,
in Wagoneers

 Share

Recommended Posts

baymanx Apprentice

baymanx

Posted
  • Author
Posted

Ok i finally managed to get the error code which is 0100, relating to the air flow meter sensor according to the error code table.

Now if $255 plus tax is about right, i will have to order one from Lander Nissan in Prospect NSW.

On the other hand its possible to order 1 from amayama.com as well for $110 USD plus expenses like, shipping etc.

Which one would be the better option? the wait period will be around 2 weeks in both cases.

Link to comment
Share on other sites
baymanx Apprentice

baymanx

Posted
  • Author
Posted

Just jap in sutherland has a 2nd hand for $110. I m just not sure if its worth it, they r saying it came out of a running stagea, but they will not guarantee if it works nor they will take it back if it doesnt work. Still best bet is to wait an answer form amayama i suppose.

Link to comment
Share on other sites
Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)

Don't buy a second hand one, and don't buy one from Sinergy.

Genuine Nissan from your local dealer, or Amayama if you're happy to wait a bit longer.

+1....there are certain parts I will only get from Nissan. This is one of them. Edited by Jetwreck
Link to comment
Share on other sites
baymanx Apprentice

baymanx

Posted
  • Author
Posted

Confirmed the order from amayama $116 AUD including postage. They r saying it will take 2 weeks and i ll have to pay the difference for the customs duty tax. For a small item i dont think its gonna be that much anyway. I believe its the best deal out there so far and needs to be considered for a mass order.

Link to comment
Share on other sites
  • 2 weeks later...
baymanx Apprentice

baymanx

Posted
  • Author
Posted

OK i got the AFM and just put it in.

Started the engine and it looks like its running a bit rich, some black smoke was there but after a short round the block drive i think it readjusted itself and seems to be fine now.

The engine light is still on though, i ll try reseting it and see if it goes away.

Pretty happy with amayama.com, cheap fast delivery, good reliable service with genuine nissan parts.

Thank you all for your input.

Link to comment
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Good to hear. I have a car here with the same symptoms (other than engine light), it has a seized turbo. Be glad you got out of it so cheap.

I have to order a new accelerator pedal assembly from Amayama next week, so I will see their great service first hand hopefully. :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      And yes would be going to tomei Japan for sure as it’s closer to me … 
    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      Yeah I heard the same. Might be hard to order one. But then I guess can go to hks or go to a more expensive n1 block with tomei. Guess will jump the hurdle once I get there next upgrade around. I can’t get work done in the states as the lead time will take for ever on top of shipping to Hong Kong. 
    • joshuaho96
      Max horse power stock internals?

      By joshuaho96 · Posted

      https://www.platinumracingproducts.com/en-us/products/nissan-rb26-cast-blocks This is the solution I was thinking of. I would stay away from Tomei USA, their quality is a question mark to me. If you want an engine machined in the US contact Club DSPORT: https://clubdsport.com/ Tomei JP is probably fine but I recall they stopped doing pre-assembled short or long blocks. In general it's pretty tough to get any kind of RB26 block at the moment with Nissan so severely backordered.
    • joshuaho96
      Nismo front and back LSD

      By joshuaho96 · Posted

      PAR specifically offers stock ratios in their gearset and you could do whatever ratios are physically possible supposedly for no extra cost. I agree 6 ratios is better than 5, the factory 2nd gear is equivalent to the Getrag 2nd gear if you account for the differing final drive ratio though. The Getrag 3rd gear with a 3.916 final drive is equivalent to a 1.6 2nd gear in the FS5R30A. I'm about to swap the transmission out on my car, I'm tempted to send the one I have now out for rebuild with the standard "cross ratio" gearsets out there to see if it really makes such a big difference the next time I pull the transmission.
    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      This is what I was looking at next:  https://www.z1motorsports.com/engines/tomei/tomei-rb26-28l-short-block-assemblies-p-45479.html as we can’t bore the cylinders out in hk so better just buy the whole lot in one and install then retune. Everyone saying the weak link are the bolts holding the rods together. I already did valve springs, arp head bolts, hks racing coils, nismo fuel pumps and pressure regulators, injectors etc for the top of the engine. 
×
×
  • Create New...