Jump to content
SAU Community

M35 Blown Turbo?

baymanx

By baymanx,
in Four Door Family & Wagoneers

 Share

Recommended Posts

baymanx Apprentice

baymanx

Posted
  • Author
Posted

Ok i finally managed to get the error code which is 0100, relating to the air flow meter sensor according to the error code table.

Now if $255 plus tax is about right, i will have to order one from Lander Nissan in Prospect NSW.

On the other hand its possible to order 1 from amayama.com as well for $110 USD plus expenses like, shipping etc.

Which one would be the better option? the wait period will be around 2 weeks in both cases.

baymanx Apprentice

baymanx

Posted
  • Author
Posted

Just jap in sutherland has a 2nd hand for $110. I m just not sure if its worth it, they r saying it came out of a running stagea, but they will not guarantee if it works nor they will take it back if it doesnt work. Still best bet is to wait an answer form amayama i suppose.

Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)

Don't buy a second hand one, and don't buy one from Sinergy.

Genuine Nissan from your local dealer, or Amayama if you're happy to wait a bit longer.

+1....there are certain parts I will only get from Nissan. This is one of them. Edited by Jetwreck
baymanx Apprentice

baymanx

Posted
  • Author
Posted

Confirmed the order from amayama $116 AUD including postage. They r saying it will take 2 weeks and i ll have to pay the difference for the customs duty tax. For a small item i dont think its gonna be that much anyway. I believe its the best deal out there so far and needs to be considered for a mass order.

  • 2 weeks later...
baymanx Apprentice

baymanx

Posted
  • Author
Posted

OK i got the AFM and just put it in.

Started the engine and it looks like its running a bit rich, some black smoke was there but after a short round the block drive i think it readjusted itself and seems to be fine now.

The engine light is still on though, i ll try reseting it and see if it goes away.

Pretty happy with amayama.com, cheap fast delivery, good reliable service with genuine nissan parts.

Thank you all for your input.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Good to hear. I have a car here with the same symptoms (other than engine light), it has a seized turbo. Be glad you got out of it so cheap.

I have to order a new accelerator pedal assembly from Amayama next week, so I will see their great service first hand hopefully. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      5th November if you want to come out for a spin wakfield
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...