Jump to content
SAU Community

Recommended Posts

Selling complete motor with turbo and ancilliaries, has been sitting for over a year but starts and runs. Can post video of starting engine if requested. A bit rich, sensors and shit are probably filthy. 140,000kms. It's very clean aside from a few cobwebs. Recommend an immediate major service at the very least. Uses no oil, blows no smoke. $900 ono or $800 if you come get it from the car yourself!

5 speed gearbox very nice and notchy, no issues with synchros, clutch is superb and will come with gearbox unless someone wants it real bad with the engine. $800

I have the whole car (stock White Manual R33 GTS25T), feel free to ask about other parts.

Located in NEWCASTLE.

should probably add that I'll ship stuff like the engine and gearbox but I've never shipped stuff that big, you'll need to help me out.

0448 123 401

Edited by WeedSpeed

Is the engine still up for grabs?

I have a guy looking at the whole car on friday, I can let you know after then

I had a closer look today at the motor, it seems to be missing under 1500rpm...above that no miss. Maybe plugs and leads?

Plugs, packs, afm, fuel pump just to name a few reasons lol

All good man I need the engine soon I'm going to look at one tomorrow.. Let me know how it goes but. Good luck!

Hey mate guy has cancelled let me know if you're still interested

Yes mick gearbox is still here :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...