Jump to content
SAU Community

Recommended Posts

The guy at my gym said chinups are much easier and work more of your biceps. He suggested I start with chinups, then go negative rep pullups and work up to a straight leg unassisted pullup which he said is more lat work.

Fair enough, I like chin ups so will keep doing those.

My numbers can be disregarded as they're not in line whit this thread sorry.

For everyone else playing at home.

http://www.aworkoutroutine.com/pull-ups-vs-chin-ups/

The guy at my gym said chinups are much easier and work more of your biceps. He suggested I start with chinups, then go negative rep pullups and work up to a straight leg unassisted pullup which he said is more lat work.

They are easier.

His advice is wrong.

Partials of the pullup (at the top of the range) combined with negatives are where you should try and start. Most people can't do a single pullup. I gave my son this version of beginers the other day. He couldn't do a single. He can do 5 full now within a short period of time.

Fair enough, I like chin ups so will keep doing those.

My numbers can be disregarded as they're not in line whit this thread sorry.

For everyone else playing at home.

http://www.aworkoutroutine.com/pull-ups-vs-chin-ups/

Dribble....... Lots of rubbish in there it's hard to know where to start.

So how many chin ups can you do Rev? I'm guessing 30+ if you can do mid 20s pull ups and chins are easier?

No idea. I don't do them. I can tell you that there is far less correlation than that article will lead you to believe. It is very common for people to be able to do 10 chins and 0 pullups.

but I take this slowly as it comes at the end of my routine and my forearms/elbows are usually fatigued by then and I've strained them once or twice.

Any that's my two cents.

The locked postion of chinups can give you some injuries in the forearms elbows. Moreso than pullups.

Is there a consensus about one being easier or something? I've always preferred having a supinated grip as it's easier on my wrists.

It's setup that will determine the angle of stress in the arms and shoulders. When doing a pullup, you want to look upward on the way up till just before the top. This will help tilt the body into a better postion. The chinup is more challenging on the elbows as this technique has little effect. Higher engagement of the bicep means the elbows are set to take up the fulcrum loads, you really only have the width to play with.

To be fair here, any of Leesh's attempts at pullups or chinups have been done straight after her volume training on lat pulldown...which she does at close to bodyweight...so I think fresh off the bat she'd be able to knock out a few reps of pullups.

  • 2 weeks later...

I started doing negatives of chinups today and then did my assisted pullups - I can get half of a regular chinup out now! Cut the assistance weight in half, though chins/pullups are a movement i'd also not done much of until lately, in favour of lat pulldowns.

  • 2 weeks later...

Haven't updated for a while, but I'm now

13

13

12

11

10

10

15

13

12

11

(5 minute rest)

13

I find this exercise interesting, because it's the only exercise I do where I shoot for maximum resistance straight up, without a warm up. I guess this is because of the static resistance level, but I sometimes contemplate whether I should do a few reps as a warm up and then go hard, or keep doing what I'm doing.

Either way it's been working, as I've been able to up the reps in the first set by 1 each week. This should theoretically bring the reps of the second set up with it, and so on, as my muscles adapt to higher numbers and follow up sets stay relative. Same way 1RM training increases volume, I guess. So the important thing here, is being able to get that "1 set max" up. 20+ would be a nice place to be, for the short term. Maybe then I'll look at weighted pullups.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...