Jump to content
SAU Community

Recommended Posts

Okay well tonight I hit 5x140kg on my max set after doing 8x130kg last week. Will do 140kg again next session and I hope to get 6 or 7 of them out.

My 1RM is 170kg, but I haven't attempted 1RM for a few weeks, so it should be a bit higher now that I'm approaching that figure with my working sets. I love how 1RM and working sets compliment each other on a back and forth!

My current goal is a 200kg deadlift @ 80kg, which I'll be very happy with.

Do ppp and you will be there in no time man.

200kg might not seem like anything in the powerlifting scheme of things, but it is definently a tidy 1rm for your average gym goer!

Edited by Mitcho_7

I haven't plateaued yet, so will just keep doing what I'm doing for now. Yeah man, a year ago I didn't think I'd ever lift close to what I'm doing now...stoked! Think I'll be very happy with 200.

Okay well tonight I hit 5x140kg on my max set after doing 8x130kg last week. Will do 140kg again next session and I hope to get 6 or 7 of them out.

Got out 140kg x 6 tonight...grip gave way on the 7th, just before lockout. Afterwards I couldn't open and close my hands, lol! 3 minutes later and I pulled 150kg x 3.

So...should try for 7 next week or crank the weight up and try for 150kg x 5? Be interesting to see how I do on that 1.5 x bw deadlift challenge now...might have to revisit it in a few weeks.

I sit there like a cripple with my hands all closed up for about a minute before they slowly start to open after deads.

Then another minute for the skin to kind of relax.

I reckon low reps and high weight work better for deadlifts.

I want my back and legs to be tired before my hands give way or before it becomes cardio (5 reps plus)

After doing deads in the 8-12 reps range for a while and then doing 5x5 and PPP for deads, I definently like the lower reps. Sets of 5 are probably what I like doing the most, but singles and triples aren't bad to mix it up.

Got out 140kg x 6 tonight...grip gave way on the 7th, just before lockout. Afterwards I couldn't open and close my hands, lol! 3 minutes later and I pulled 150kg x 3.

So...should try for 7 next week or crank the weight up and try for 150kg x 5? Be interesting to see how I do on that 1.5 x bw deadlift challenge now...might have to revisit it in a few weeks.

Why not both?

90 x 10

110 x 10

140 x 7

155 x 4

Had no grip issues tonight, cooler weather = no sweat. Next sesh: 160 for reps.

I'm using chalk, whenever I can find it / steal it from the cross fit section at the gym. My grip is never an issue for 1RM attempts, it's the holding of the bar for extended periods of time that seems to do it.

I don't think I have the strength to lift 200 yet. I'd guess 180, maybe 185 based on my 1RM of 170 when I was doing 120 for 10 reps. I will start training the 1RM again soon, though. Took a bit of a break from it when I stretched a back muscle.

Funnily enough, the older ABC bars have better knurling than the new Ironedge bars we have :/

depends on if you are talking 1RM or reping sets and even then you can do sets of 1RM starting at 100% like below

1RM

3sets of 8 - 12 say 100kg

1 x 110kg

1x120kg

1x130kg

and so forth increasing until failure to see what your 1RM is. obviously you get tired but then you would start at say 80% of that 1RM next week

as for 7x2 i ment max weight that you could do for 7 sets would prob be 130kg instead of a 100kg for 3 sets of 8-12

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...