Jump to content
SAU Community

Recommended Posts

Damn that's a good time I'd be very happy with that.

I wish I could get my run in except they've cancelled for the last two weeks due to weather :(

Soon the AR-X's will own best times in 3 states.

1 may even have the Australian title! :P

I can't wait to get the rs260 down the drags, sort the clutch out then before the mods will do a run to see what mph I'm getting at the end or the 1/4 for bench mark!

Hoping ill get it lower 60 foot than my VL! Don't think ill get it lower than what the VL has run! If I can get it as low as what rbnt got his rs260 up here 11.8 ill be very happy :) ps I wish the track was only 28 degrees most of the time it's in the 30's plus

Any ideas on what a completely stock 250t rx 4 would run?

Im heading to the Eastern creek drags on the 22nd if anyone else is keen.

Possibly keen. Just gotta see if my car is happy before then.

Would like to see where I'm at currently.

Had my first run ever at the drags last night.. Only got 4 runs in. The best I could muster was 13.4 pretty happy with that..

The car kept getting really cold as we were having over hour waits between runs..

Hopefully keep improving the car and the tune...

Had my first run ever at the drags last night.. Only got 4 runs in. The best I could muster was 13.4 pretty happy with that..

The car kept getting really cold as we were having over hour waits between runs..

Hopefully keep improving the car and the tune...

well done great time:)

It's a lot easier to keep a car warm than to cool it down, mine was heat soaked and I could do nothing about it. Other guys were putting bags of ice on their coolers and engines to help combat the heat.

I should probably get up to Heathcote soon now it's winter and get a time on the current tune, I am only going down in power from here. (perhaps back to a highflow soon) I have had my fun...

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...