Jump to content
SAU Community

R33 Problem


Nige1
 Share

Recommended Posts

I have an r33 skyline 1994, it has a bad case of backfire, it has very poor acceleration and when i accelerate it gets stuck at 3 rpm backfiring really bad, i have check spark plugs, fuel filter, coils, afm, vacuum leaks, i have cleaned throttle body, afm, aac valve ive had a mechanic check it he cldnt find problem, its undrivable and check engine lights on, timing strts up at 20 on strt up and slowly decreases to 15 as car warms up. Mods are

Splitfire coils.

550cc fuel pump.

3 inch turbo bAck exhaust

High flow turbo

Apexi pod filter

Apexi fc commander

Boost Gauge

Front intercooler

Boost controller

Lowered 1.5 inchs

Short shift gear box

What di you guys think

Link to comment
Share on other sites

Even though you have splitfires in there it sounds like textbook coilpacks.

Try some other known working coilpacks in it.

Otherwise you say you have only 'checked' sparkplugs and 'cleaned' the AFM.

Id go for changing spark plugs to the tried and tested bcpr7es .8 gap. Also 'check' that you dont have a dry solder on your afm or some other problem/damage in it.

That timing seems normal but otherwise when was the last time it was tuned/ PFC checked?

good luck. Nothing worse than a case of the missfires/backfires.

Edited by jjman
Link to comment
Share on other sites

I changed sparkplugs to those ones clned maf the joints look fine but it could be i unplug maf while car was running it stalled strted it up with maf unplugged idled shit we tested coils by unpluging one at a time while car was running

Link to comment
Share on other sites

coils will often work fine at idle and low rpm/throttle levels, but then loose their shit at higher rpm, that 3-4000rpm range as you hit peak boost...

But yes, overall doesnt point directly to coils.

Link to comment
Share on other sites

mate it seems at peak boost is when your problem is, has to be either afm or coils/plugs. very sure of it. i put to much oil on my air filter once and when it hit boost at around 2600rpm it hit a wall, point being afm wasnt reading correctly. and coil packs bring on the engine light. on standard computers anyway not to sure about pfc in how it stores trouble codes if it has any

Link to comment
Share on other sites

I think my catylac is f**ked from all the backfiring, ill check cas nxt thn inevitably hve to either sell it as wrecking or project or leave her in the shed til i can afford mechanic

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...