Jump to content
SAU Community

Recommended Posts

Tried the heatbag while stretching for warm up last night, it made a noticeable difference in comfort, I used it again before bed and don't feel too bad today.

I'm going to stretch/heat bag daily and see what affect that has before seeing an Osteo.

Mixed it up a bit last night as I'm not as worried about my back being an actual injury from gym. This is the order, 2min breaks between sets.

Squat: 53kg - Success (ankle protesting a bit and has been a bit swollen of late as I've been up a lot doing things at home with the new arrival).

Bench: 91.5kg - Failed 8th rep of 3rd set, got close, couple of inches off the hooks.

SLDL: 53kg - Success

Rows: 53kg - Success

Curls: 43KG Failed 8th rep of 3rd set.

Bench(Spa) dips: Managed to get 8.5kg of weights into my pockets lol - Success 3x 30reps and slowing them down so they are harder.

Dumbell Lunges: 16kg total in hand - Success

Lateral Raises: 4.5kg each hand (I do 4 out to the front and 4 out to the side in each set and 3 sets) Success but starting to feel it towards the very end.

Did a set of 10 slow narrow hand position pushups (on my fists), no problems.

Did a 30sec side plank each side just for the sake of it, Success but tiring by that point. I honestly do not think my back issue is a core strength problem.

No big DOMS issues today but tomorrow is more so when I'd feel it.

All in all happy with that given I increased the weight on everything in one session, even if only by a small amount.

I miscalculated, the new weight is actually a touch over 52kg, not 53.

Anyway, managed to succeed at everything tonight, but took a 2.5min break before the last set of bench and curls to ensure I got them out.

also my ankle is giving me a bit of a twinge up the inside at this weight so I will take it slowly despite being able to get the reps out without too much leg drama.

Also managed to stuff 10kg in my pockets for bench dips.

Just choosing a bench and then I'll order my rack :)

Edited by ActionDan

Still undecided on a bench =\

Can't seem to find a middle of the range one.

As for exercise, completed everything except the curls but went straight 2min breaks instead of having the last set be a 2:30 break for the bench and curls. Got there with bench, not with curls.

Feel like a lot of exercises could take more weight, especially squats and rows but taking it slowly for the ankle.

Getting a rack will help but I need a new bench first...

From the main thread.

Rack, bench, new bar, and foam roller ordered and paid for.

Also had a promising session with the physio today, that is, I was handed over to the resident SIJ expert.

She did say something I thought was interesting too, she'd rather see me only squat half way but with my feet pointing ahead "properly" than have an angled foot position and go lower.

Thoughts?

She said she is very confident she can "smash" my ankle to get better ROM and wants me to start working on what she calls "inner core" strength and had me doing this weird "tuck your tummy in" exercise but without tensing abs or obliques, she thinks my inner core is shot from being laid up for so long and said I need to learn to reactivate it which is what's giving me grief.

She said fitter/active people can muscle their way through weakness like that by recruiting other muscles which is what she thinks I'm doing.

She also jammed her fingers into spots in my hips to test for some reaction which apparently was shit and was very uncomfortable.

Cheers, stoked to have finally gotten around to doing it.

Aside from the safety factor, I may even look to ditch curls all together now that I'll have a chin up bar.

Completed everything last night without issue, looking forward to getting the rack so I can get some more weight into some things. Managed to cram 11.5kg into my pockets for bench dips lol

Had a go with the roller last night after looking at some clips on how to target the SIJ, it does target them but I can't say I feel any different today, I'm going to have another go shortly as my back is a bit sore/stiff with some referred discomfort down the back of my left leg.

I think I have the muscle worked out that the physio wanted me to learn to activate again and have been trying to do so while exercising, definitely a different core stabilising feeling.

Built my bench this morning, pretty happy with it. I'll take some glory photos when the rack is here with all my new gear.

The missus informs me my rack arrived this morning, she didn't make the door in time (shower) so they left the 2m tall however heavy box on the door step lol

She said she took it through to the gym room piece by piece to get it off the door step.

Also played with the roller a bit more, not sure I think it helps all that much though it is uncomfortable.

Heat seems to be the best thing for it. Stretching and rolling only give limited relief.

Physio again tomorrow, we'll see if I've learned to activate the muscle she wanted me too.

The missus informs me my rack arrived this morning, she didn't make the door in time (shower) so they left the 2m tall however heavy box on the door step lol

She said she took it through to the gym room piece by piece to get it off the door step.

Also played with the roller a bit more, not sure I think it helps all that much though it is uncomfortable.

Heat seems to be the best thing for it. Stretching and rolling only give limited relief.

Physio again tomorrow, we'll see if I've learned to activate the muscle she wanted me too.

It's all about getting blood flow into the muscles. heat helps, as does massage.

Hah, actually, since the arrival of the baby the missus does have a new and splendid rack... but no pics for you.

Yeah I stretch, use heat, foam roller etc and it all "helps" but I am looking forward to it being solved.

Edited by ActionDan

Short on time tonight so reduced breaks between sets and still competed everything then started rack build.

Got the pulley mount to do yet. Will need to put something solid underneath as a pull up makes it want to lean forward when on the double layered carpet.

Not sure what I think about the dip handles only being welded one side.

post-23873-0-59868800-1367844488_thumb.jpg

post-23873-0-92572800-1367844553_thumb.jpg

post-23873-0-42652800-1367844614_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...