Jump to content
SAU Community

Recommended Posts

It's all good, the ankle will always be a problem, no different to my elbow, but the elbow can now be beaten on without too much issue, the ankle will get there too.

The back I expect to get a bit better yes as it was fine before I started squatting again so I'm doing things wrong.

I had physio today and she wants me to use a small step under my heel to give better ROM through my ankle while squatting to stop my feet splaying out as I go down, we did some practice movements, I also need to sit up straighter, no back rests, and continue working on my TA activation, she also gave me a different ankle stretch and worked on the ankle itself as she said the lump I have prohibiting the ankle ROM is fibrous tissue around the sheath in that area.

So we're making progress at least.

At least this is costing me nothing.

As per the main thread.

Anyway, finished rack last night (left band pegs and push up handles off as not needed) and I don't think it was intended to be a one man job lol

Tried dip handles and chin up bar, head just clears roof on chin up bar, dip handles seem sturdy enough but having a bar on the pegs gets in the way.

I'm now thinking about the logistics of using it (I was hoping it would save me some time) but now I'm thinking it might cost me time to move from squat to bench etc etc.

I'll have a play tonight.

post-23873-481744_thumb.jpg

Edited by ActionDan

As per the main thread.



Had my first session with the rack last night, it's different, added some weight to squats, bench, RDL and row, nothing much just an extra kg or two here and there as that's how the plate config came out.



This is how it looked. Completed everything but started to feel it and had to work for the last reps on the chins. Everything is sets of 8 except squats which is sets of 10.



Squat 54


Bench either 92 or 93kg, we'll say 92.


RDL 54


Row 54


Chins BW


Dips BW



Got my pin locations sorted and worked out my positioning for movements, the actual bench etc. The bench takes some getting used to and requires more horizontal stability from me/my legs while benching. Made more obvious by the longer bar too.



A few things I noticed. As I've been trying to move away from curling like a bro, I've been really keen to get the chin up bar and did chin ups (or whatever they are called with an underhand shoulder width grip - pull ups?) and didn't find that I felt like my biceps got much out of it certainly not as much pump after exercising, maybe at the top of the motion with some explicit contraction but otherwise not much and it's mostly in the upper lats I feel it today.



Also, used the dip bars instead of doing weighted bench (spa) dips and didn't feel like my triceps got much out of that either, to be fair my bench dips were sets of 30 because I could only fit 11-12kg in my pockets lol and the actual dips were just 3 sets of 8 but I just expected more burn on the triceps and if anything felt it more across the shoulder girdle, I think I need a belt for chin ups and dips to get some weight in there asap.



Am I wasting time doing chin ups and dips if my main goal there is to try and get some decent bi's and tri's during a compound motion? I want to stick to purely compound stuff where possible for efficiency and max calorific burn (with the exception of some dumbell lunges that I do for ankle stability improvement).



Also, put some 1/2" wooden blocks under my heels for squats and that makes a big difference. I can get to parallel and a bit below without my feet splaying outwards and straining up the inside of my bad ankle. Feels good man.


Edited by ActionDan

Upper lats still tender from pull ups, so clearly they need some work.

Foam rolled last night, had a stretch and heat bagged, back felt better but still tender today.

Had a go at rolling the lats, can't say it helped heaps but it hurt during lol

Completed everything on Friday, quads and lats still tender so that's something new.

Swapped out RDL for straight DL, completed OK but can tell the form is wrong, working on it.

Straight DL deffo engages me more than RDL.

You're the same as me mate...I used to do stiff leggeds and found regular deads awkward as fk. Stuck with it thought and in no time at all I was climbing up the weight on regulars and MAN did it work my body harder than the stiff legged...even with much less weight. Eventually I passed the weight I was doing on stiff leggeds and I've never looked back. <3 deadlifts

Yeah I just did deads with the weight I was using to RDL, definitely harder so that's good.

I watched a Ripptoe video today which I think will help me, I had the order wrong as in when to break at the knees.

I'll know tomorrow night if I'm on the right track.

Start with a lighter weight until you're happy with your technique. Don't assume that because you're doing another form of a similar exercise, that you can just transfer the weight across. You're using a completely different synergy between muscle groups and joints.

It's already very light but if Monday shows no improvement I'll drop the weight to get it right as I'd like to make the move to DL it seems much more intense than the other forms.

Man, I am so confused.

Had a good stretch last night watching the F1, foam roller, heat pack, the works.

Back feels like crap today and I didn't do a lot on the weekend, maybe held some awkward poses while polishing Kate's car but otherwise nothing strenuous.

FML

Yeah I know, just shits me. I'm sitting up straight at work and not using the back rest like asked, not crossing my legs ever (when awake) as asked, doing the stupid TA activation exercises as asked, stretching, foam rolling, etc etc. Taken 2x 1 week breaks, no change.

Might still go and see a Chrio just to rule that out, but every physio and Myo that's looked says structurally there's nothing obvious.

At least it's not acutely painful when lifting :)

Despite back feeling average last night I did my session anyway and it feels a bit better today, and felt fine during as usual once it's fully warmed.

Still working out my spacings etc and I would've liked my bench to be wider as it requires more core stability/leg stability to remain stable during bench.

I added 5-6kg to the row because it's been very easy and still managed it though it was obviously that bit harder, more so on the sore part of my lower back.

I had another go at deadlifting and after 3 sets did another 6 reps but video'd it to look at the lowering phase (thoughts?)

http://youtu.be/CHhaB2WOTcA

I mixed up the dips at bit too, I need a dipping belt it seems, I did a set of 8 and felt nothing so waited 10 secs and did another set of 8 and then put 4.5kg in my pockets and did a set of 10 and started to feel it by the 10th rep so I'll start adding weight to my dips and I'd say my chins soon enough also.

Upper lats have recovered from initial shock of chins and I can get out my 3 sets of 8 without too much fuss now.

I'll look to start adding squat weight too as I'm feeling more comfortable there now I have my heels up on a block.

Edited by ActionDan

Physio yesterday, she did some more work on my ankle and measured a few things, there was an improvement in my range already so she seems to have a good handle on whats going on.

She swapped out my bum raises TA activation exercise for a kneeling then arm raising one, it is much harder and somehow manages to flog my lower back, she said this is a good sign that my "inner" core strength is not great despite my posterior chain being strong enough.

I'm very surprised that not a single person commented on the DL video here or in the main thread given how quick everyone normally is to point out flaws lol

Gym tonight.

Had a decent session last night.

Squatted 60kg

Bench felt weird and lopsided for the first 2 sets, checked bench location, grips etc, realised I'd left 1x 3kg plate off one side... so added that back on and added another 4.5kg for a good 96kg+ and got that set out so was happy.

Had another go at DL, still only 54kg, but it felt better. Also tried mixed grip and that felt good too.

Rowed at 60kg - with this, are you guys rowing from the floor with your back parallel? I see a lot of talk about what is the right way. I am doing them at 45 deg to the waist.

Chucked 4.5kg into my pockets for chins and managed to get those out.

Kept that in my pockets while doing lunges, so carrying around 28kg on those now.

Kept the weights in my pockets for dips and did 3x 10 instead with shorter breaks and had no issues.

Might get a dipping belt.

if it were me, and I was forced to use 10kg plates, I'd get measurements of a proper 20kg plate, work out the difference, and cut some blocks to put under them.

Having said that, deficit deadlifts (which you are doing) are a great assistance exercise for deadlifts.

But not a replacement.

/my opinion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think the consensus was that's normal. Sloped road surfaces or something? I remember @silviaz went through this before. It might be one of those things you never notice until you pay attention to it.
    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
×
×
  • Create New...