Jump to content
SAU Community

Recommended Posts

Just had a a visit with the physio and I might be off to surgery again.

I've had some noticeably different swelling at the very top of the scar in my leg and some discomfort around that area, she thinks that I may be getting migration in the metal work, that is, at least one of the screws is starting to come out.

I asked straight up if that would be due to squats/deadlifts and load going through it, she said not at all and that it's more to do with how your body reacts to the intrusion, how quickly bones heal etc etc. I've also been told that I've had good bone strength based on no breaks through some of the injuries I've had so we'll just assume that my bones no longer need the assistance and are too awesome to rely on metal work so they're now spitting the metal out.

She normally this process takes quite a while so to get it at this point implies that the rate my bones heal at is quite good.

I'll hear this arvo about when my x-ray is then go from there. If surgery is required she said there's a good chance everything will come out but that I would not need to take any time off gym and just to be mindful of pain in the first few days tops so that's good news.

Still awaiting results of the X-ray.

In the meantime, minor progress.

Decided to go straight for the higher 5th set of squats and stalled on the 5th rep on the 5th set, pushed through it but had an oh shit moment. That's a double bonus as the last set used to be lower weight and low bar for practice so my legs are not used to doing the 4th set weight twice let alone adding 5kg. These were all high bar. Kind of sad in a way that 95kg had me concentrating to get it =\ Such is my shitful leg strength. MY goal remains to get my squat and DL above my bench so I am leaving bench where it is.

Squat high bar

75.5 80.5 85.5 90.5 95.5

Bench, DL, and Row unchanged

Chins and Dips had a go with the new belt, not a bad thing, was easier to use different plates so the increments meant I added a little bit of weight to both exercises and there's easily more in the tank.

Chins

2.5 5 7.5 10 12.5

Dips

10 12.5 15 17.5 20

Edited by ActionDan

Minor progress.

Consolidated at the increased squat weight, all low bar this time which felt easier but I now have a light groin strain as per the main thread.

Increase on deads and rows, consolidated on increased chins and dips.

Gym

Squat low bar

75.5 80.5 85.5 90.5 95.5

Bench

95.5 99.5 104 106.5 109

DL

80.5 85.5 90.5 95.5 100

Row

73 77 79.5 82 84.5

Chins

2.5 5 7.5 10 12.5

Dips

10 12.5 15 17.5 20

I have an appointment Monday to see the fracture clinic about my X-ray results.

Edited by ActionDan

Well it was a mixed bag at the Fracture Clinic.

The good news is the metal work has not moved and the Dr is suggesting we wait another few months to give it a full year before making any calls.

The bad news is that he's also suggesting that removal might be the better long term solution because then there's no question of if it's causing me any irritation. That would mean up to 6wks off any impact sports/exercises etc, so no squatting and no DL. Everything else I could do and walking would be fine. I'm wondering if ham string and leg curls could be OK but I have no provision for doing those at home.

I'll be seeing the physio on Friday to talk about it more now that we know that at least the metal work is staying put.

Part of me wants it out never to have to worry about it again, part of me doesn't want 6 wks off when I'm just starting to get some momentum in things. Then I think well whats 6wks in the grand scheme of things if it means not having to think about the metal any more.

If I just go ahead and leave it in and then find out it's an issue say 5yrs down the track, it's a more serious surgery to remove it as the bone grows over/around it over that length of time. 1-3yrs is the ideal window for removal.

What would you do?

Edited by ActionDan

Minor update for chins and dips, what is considered OK numbers for these as I don't feel like I'm struggling too much with these, I could probably add another 5kg on on both right now and be OK. My issue is the strength of the dip bars, which I'm discussing with the rack seller, I may look at a better rack.

Everything else was unchanged, dd my squats low bar this session which I think I prefer.

Feel like I could up the bench again but as mentioned trying to leave it as is for now until other things catch up. I could add some more to the DL but at this stage the ankle is a little tender so I'm waiting for it to get used to the current load and simmer down.

I want to really lay on some kgs on the squat and DL so that when I have my surgery and stop I'll be further ahead but realistically I don't think I'll be making any great leaps. 95kg still feels like a semi struggle on the last rep of the 5th set so I'm either doing it very wrong like I was with the DL or I'm just that weak.


Squat low bar
75.5 80.5 85.5 90.5 95.5

Bench
95.5 99.5 104 106.5 109

DL
80.5 85.5 90.5 95.5 100

Row
73 77 79.5 82 84.5

Chins
5 7.5 10 12.5 15

Dips
2.5 15 17.5 20 22.5

I was contemplating picking a Friday every now and then and doing the first 2 sets of say squat/bench/dl then for the last few sets trying to do whatever I can above my previous PB just to surprise the body and make it realise it's OK to go higher. Kind of like the 5x3x1 thing that people use when doing 5x5s.

Edited by ActionDan

Gym is at home and yes, same routine, M/W/F takes about an hour.

EDIT: Same session as in exercises, but over time slowly adding weight. I take it pretty slowly as I've had injuries in the past from rushing it and have a bit of a bum leg at the moment.

Have also paused bench for now until legs catch up a bit, more of a mental thing more than anything plus not sure how strong this new bench is =\ Supposedly rated at 200kg including user and I'm pretty much at that now. Should have read the fine print.

Edited by ActionDan

Increases all round tonight, will be interesting to see how I pull up and if I consolidate on Friday.

Finally into triple squat figures. The more I do the more I prefer low bar.

Squat

80.5 85.5 90.5 95.5 100

Bench

101.5 104 106.5 109 111.5

DL barefoot

88 93 97.5 101.5 104

Row grip giving out on this

73 78 83 88 93

Chins

7.5 10 12.5 15 17.5

Dips

15 17.5 20 22.5 25

Edited by ActionDan

Cheers. Surprisingly, not feeling too bad today (ankle wise that is).

Will be a shame if I go ahead and get this plate out and need 6wks off but at least then I won't be worried about it.

Where is your build thead?!

You know what nigga, I'm not liking that attitude.

If you're not enthused an upbeat about the work you're doing you're going to have a much harder time of it.

It's important to find an activity(ies) that work for you both mentally and physically.

Especially for the long term if you;re going to make it a lifestyle change.

My progress is small too but I'm still happy to see it. It's all forward motion baby.

Edited by ActionDan

Had one of those sessions tonight where everything feels a bit heavier. Probably because I was hungry.

Good to know I could thug it out and get through it though.

That's the sort of thing I mean when I say I like consolidate and know that on my bad days I can still do the same numbers before I increase.

I may look for a small increase on some things towards the end of the week.

Having a doubt period too where I start to wonder why I'm doing this :/

I hate working out when I'm hungry, makes me lose focus so easily :/

We all have doubt periods; I just had one recently as you're aware, but as you said to me, keep on trucking :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...