Jump to content
SAU Community

Recommended Posts

I meant that for ther same weight I am now, I've had bigger arms (which would mean smaller elsewhere and likely in the legs, I'm more balanced now).

Yeah I know I'd need more mass, it's more of a wish than a need, I don't want to be any heavier right now as there's a touch too much on the gut for my liking.

lol it's not a hang up Rev, my wrists are small, my hands are slender, my shin bones, ankles etc, just small joints, lighter build is all, not a big deal just something I've noted.

As for Gym last night.

Legs had a few tender spots from Monday (after which I did a 4.5k power walk with Kate up the hill) So toned back a little.

Did single set of 10 bw squats to loosen up a little then got into bench and went 8/8/6.8 that is I got the 7th rep over the pins, higher than last time, and kept pushing and was very very close to lockout height but couldn't quite get it. Very close though. When I can lock out 7th consistently I'll look to add a touch of weight, though I also realise I could add a touch of weight now and that'd help me get past that 105kg 7th rep.

Did 2 sets of 10 empty bar squats with a board - noticed my left knee "wiggles" as I get down past parallel, that is, it quickly flicks inwards then back out again, both sides do it bu it's really noticable on the left.

Between those 2 sets did 20 calf raises with some 3kg dumbells.

Managed 8/8/7 on the chins, 7 was ugly and got half way up for the 8th rep. Took a quick 10sec breather then squeezed out one more.

Did some 20 rep per side single leg lunges with the 3kg dumbbells and some reverse pretend deadlift with the same weights.

Went 8/8/8 on the dips so can look to add a little more next time.

Then did a 2min plank and 2 sets of 8 rows, just light ones to see how it felt.

Funny you should say that Leesh, I'd say they've gotten easier.

Remember I've switched to 3x8s and backed the weight off on everything so I can come close to making the 3x8.

I'm also still using 2min breaks, where as I used to go 60sec.

I'm still going though so that's a good thing :)

Chiro next week and will pull my finger out on the podiatrist.

Just been so busy, shed, car, gym, etc.

Fair enough. When I read it, your workouts seem to be becoming more intense.. maybe your body is adapting better now and you're not realizing. I didn't know you're using 2 minute breaks though. I keep my breaks to 45 sec to a minute except bench and squats are two minutes and deads can be up to 5 minutes.

They're a bit faster paced in that I'll now slot a few extra squat reps or something in between sets of things and keep my heart up but 2min breaks are pretty generous.

If I was back to 60secs I could not do what I'm doing now in terms of weight and reps.

I play with that from time to time though, longer breaks when I'm going heavier or trying top break a plateau then I'll hit a busy period at home and drop back to 60secs (with lower weight) to get it done quicker.

Forgot to update Friday.

Got the 7th rep on bench pretty easily somehow, only got half way up to the pins on the 8th rep though, so I'm close enough to probably add a little weight.

Tried some 20 rep squats with a huge 5kg on the bar (the bar weighs 6 I think as I was using my smaller 6ft bar as not to unload the 7ft one. Did calf raises with a bit heavier dumbbells.

Managed the full set of chins and dips and did some more lunges and another 2min plank and another 2 sets of rows at 73kg which seemed OK.

MY back and leg is tender today but I think that mostly came from a full day working on the car Saturday. I have the chrio again this week and I think I'll move on to podiatrist after that as I'm not getting anywhere with it.

After this round of issues with my back I've stepped it back a bit, on the squat and DL front mainly.

I had no experience doing those motions then go into them and started adding weight, with a funny gait and weird pelvis due to my leg issues, I think that's loaded me up wrong and caused this back problem. So I need to get that sorted first.

Also, with limited time, desire to eat like a pro etc, I'm not about to make huge gains.

I'm also on the high side of 80kg's so no longer the skinny 65kg kid I was that developed these paranoia's about being skinny.

Could I have bigger arms? Yes. Do I want to train and eat as hard as I need to in order to get them? Probably not. I'm not a weakling anymore, I'm not scrawny anymore, and I've got so many other things I like to do, plus a 6mth old daughter.

So I've just stepped back a little mentally. Dropped the weights to what's challenging for me, but not completely unattainable, and am just looking to stay a little stronger than your average desk jockey and stay in shape.

Just relaxing the whole vibe a bit, as I was getting a bit devo about not being able to squat and DL big numbers or beat Marko's girls etc etc.

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...