Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I bought the Bosch H595 Specific Fit Rear Wiper Blade as well as the AR18U and AR21U. Worked out to $55 delivered to Australia. The last time I bought Bosch wiper blades in Canberra I paid almost $80 at Ricerbarn, so I am happy with my savings.

I just hope the rear blade is the right one!!

Do you have a preferred application method for rainex? I always manage to go overboard and it seems to make my wiper blades stick a bit.

Wipe it on in circular motion, making sure you overlap.

Then mist water on, an wipe over with a handful of folded paper towel. That gets rid of the streaky residue.

  • 2 months later...

Sorry to bring up a slightly past use-by thread. Searched for Bosch aerotwins for a r32 on that wiperblades.co.uk website and it seems that it uses AR18U all around?!! Front 2 and rear all the same?? And anyone used a flat blade to replace their rears? Somehow I think the website has wrong data...

I'm sure the driver side is meant to be longer. I can't tell since mine already had aftermarket ones (refills you get from any auto store). Can anyone confirm?

If I could guess it would 20" aero for driver, 18" aero for passenger and 18" normal blade for rear. I would advise people to measure their originals if they can before buying.

My C34 S2 stagea uses the following

Front

1x 510 long

1x 460 long

Rear

1x 300 long

Sizes are approx. you should measure yours before you order.

I'll be looking at replacing mine soon too, the aero flat types look effective, I know I have these on my VW Golf as standard factory fitted and they work great.

Or to the too young to understand imperial;

Front

1x 510 long 20 inch

1x 460 long 18 inch

Rear

1x 300 long 12 inch

You had metric then you just added inches - that's imperial..

Just thought I might add. Ended up buying trico flat blades from autobahn to suit an r32 gtst. 20" fronts and 18" rear according to the book they had. Got em but not fitted yet. I will order the bosch for next time I reckon..should be cheaper from that wiperblades site depending on shipping of course.

Bosch AeroTwin Wipers can be bought from http://mycarperformance.com.au/wiper-blades/bosch-aero-twin-wipers.html they are $46 + postage

They also carry a cheaper brand for $26 delivered which have good reviews on ebay at http://stores.ebay.com.au/My-Car-Performance

  • 3 weeks later...

Well I bought the following wipers from Ebay for my series 2 C34

http://www.ebay.com.au/itm/QEEP-AERO-WINDSCREEN-WIPERS-NISSAN-SKYLINE-R31-R32-R33-R34-R35-PAIR-/300788425287

Qeep aero style for skyline. Seller was streettunecomau, Only $10 + $10 delivery, stock in NSW, had them in a few days,

1x 18 in , 1x21 in. Took 5 mins to fit.

Highly recommended. They are single blade type.

I wouldn't pay $60+ for a very similar product.

Well I bought the following wipers from Ebay for my series 2 C34

http://www.ebay.com.au/itm/QEEP-AERO-WINDSCREEN-WIPERS-NISSAN-SKYLINE-R31-R32-R33-R34-R35-PAIR-/300788425287

Qeep aero style for skyline. Seller was streettunecomau, Only $10 + $10 delivery, stock in NSW, had them in a few days,

1x 18 in , 1x21 in. Took 5 mins to fit.

Highly recommended. They are single blade type.

I wouldn't pay $60+ for a very similar product.

Lol I like how the installation video is for the Bosch wiperblades in the ebay ad. Have you compared to the Bosch or Trico single blade types? Seems cheap enough for me to compare to as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...