Jump to content
SAU Community

Wrecking R33 Gtst Coupe Rb25Det Engine, Panels, Brakes, Interior Etc


Recommended Posts

I have a 1996 r33 gtst that I am parting out, everything available except gearbox and tail shaft

here a few parts to start with...

near new garrett gtx3071r (internally gated) with sonic .82 rear housing - $1200 --- sold pending payment
can include braided lines to suit turbo for extra

near new splitfire coilpacks (series 2) --$400
full 5 stud conversion with brakes -- $600
all panels and interior - from $20
custom made split dump and 3'' front pipe with high flow cat and 3'' cat back exhaust (turbo to cannon system) - $350
abs diff - $200
stock cooler and piping -- $120
glass - from $50
18'' advanti wheels some gutter rash - $500
bare engine that runs perfect - $1000
radiator - $120
complete a/c setup, compressor,condenser,lines etc- $200
ecu -- $150
engine and starter looms and lots more

please enquire for prices/availability

pick up from 4127 or will post most items

  • Like 1

Series 2? How much for bonnet if still available? Text 0400326596 cheers

yep s2 will sms you tomorrow :)

Still got the radio antenna and assembly? Call or txt 0419961556. Cheers

no sorry mate someone has snapped off the antenna :(

sold so far :

garrett turbo

lhs door shell

boot interior

centre console

strut braces

cluster

engine - pending payment

5 stud conversion and brakes - pending payment

still have the drivers window switch in working order ??

if so how much ?

cheers

Just as an FYI. The S1 and S2 power window switches have different plugs. Not sure if you have a S1 it S2 but just a heads up

Engine loom is the same as S1 bar the coil pack loom? Pretty sure it unplugs and the rest is interchangeable but not 100%

If it will work in an S1 I might be interested

Hey mate yeah I found out the window switches are different... cheers

as for the engine loom the afm pinout is different from memory (s2 afm only has 3 pins compared to s1 has 5) and where the coil pack loom plugs in the plug is different...

you could use my loom with a s2 coilpack loom but not sure what you'd need to do with the afm plug...

Cheers

can you give me a good price on front bar and left guard? Managed to understeer into some armco just before and need to fix on the cheap 0458 162 430

Do you still have the rims dude and do they come with tyres? And if so what condition are they in?

hey mate I still have the rims the front tyres are new the rears are fairly worn... pm me your mobile or email for pics

got a fuse box

nah sorry bud

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...