Jump to content
SAU Community

Recommended Posts

Worried about how your car is handling? Want to know what you can do to improve her around corners and make her hug the road? We've organised a tech night with the guys at Fulcrum Stafford to show you what's going on in the world of suspension.

Event: SAU Tech Night - Suspension

This event will offer members the chance to get their cars up on a hoist and look and what's going on underneath. Minor issues such as slight wheel alignment tweaking and small adjustments can/will be made for free by the guys at Fulcrum but this is really an opportunity to take a good solid look under your car. Ideally looking at between 5-10 cars to make sure that everyone gets a shot. If you're going to the sprint day, you may want to make sure that you don't have suspension issues.

Location: Fulcrum Suspension, 46 Webster Road, Stafford

Date: Thursday, 2nd May 2013

Time: 6:00pm - 8:00pm

Cost: Free!


Requirements: This is a member only event. To attend, you will need to let us know in advance and have your member card ready.

We ask that attendees obey all Road rules.
we don't want people racing up and down the street or general Hooning.

Remember you are representing the Club, so we need to be on our best behaviour.



See you all there!
Tony

Link to comment
https://www.sau.com.au/forums/topic/424319-sau-tech-night-suspension/
Share on other sites

Excellent Carl. See you there!

Not everyone's car can be up on the hoist and this will be due to time constraints really. But it will give you an idea as to what to look out for.

Yeah mate understand about not everyone can have there car up on the hoist. I don't mind if mine doesn't go up at all, was just saying.

Damn living in Nth Queensland :( Glad to see stuff like this happening but, Props to SAU QLD team, one day we might venture up your way. Its on my to do list I swear :P

Thanks mate. A bit of appreciation from time to time doesn't go astray. :)

Yeah mate understand about not everyone can have there car up on the hoist. I don't mind if mine doesn't go up at all, was just saying.

All good mate. Was just making sure that everyone was one the same page :)

Personally, I'd prefer if people going to the sprints had their car up there. Would offer some peace knowing that everything is ok. :)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...