Jump to content
SAU Community

Recommended Posts

  • Replies 269
  • Created
  • Last Reply

Top Posters In This Topic

guys, i have been in touch with crystalfontz about this ...

here is what i found...

I use their software on my pc to display motherboard monitor stats, all very useful, and works perfectly with any hd44780

anyway ...

I was looking at :

http://www.crystalfontz.com/products/2004a...#CFAH2004ATMIJP

but didnt want this type of blue screen, so asked them directly if this :

http://www.crystalfontz.com/products/1602l...#CFAH1602LTGHJP

type of colour screen was available in 20x4 .. and it is !!!!

hoorah !

below is the reply i had from them regarding it :

Obviously it does work out to be slightly pricey, but you get a screen that is a very close match to the standard dash colours. They are also just standard hd44780 lcd modules that are a direct replacement to impakts screens. Have a look at

http://www.crystalfontz.com/products/index-std.html

any of the 20x4 screens will be a direct replacement if you so wish, and would take about 15 mins to swap them over i rekkon...

here is the mail :-

This is not a stocked item, but it can be ordered.

Here is the pricing information. Lead time is 6-8 weeks for < 1000, 8-10 weeks for > 1000.

CFAH2004L-TGH-JTW

Pricing:

1-9: US$59.52

10-19: US$46.77

20-49: US$40.48

50-99: US$36.12

100-199: US$32.15

200-499: US$29.3

500-999: US$25.51

1000-1999: US$23.96

2000-2999: US$22.94

3000-4999: US$22.69

5000-9999: US$22.18

10000+: US$21.71

Discounts are based on per-order/per-shipment. For example, 10K units shipped as a 1K order per month for 10 months qualifies for the 1000 piece price.

International orders must be paid in advance by wire transfer.

Please let me know if you have any questions.

Yotis: No idea whether it will work on the R34. AFAIK they have an OBD-II connector, and not sure if they support the CONSULT I protocol.

tang0: Glad you are happy. Atm i only have 1 left!

Impakt

Ah ok.. if anyone from gold coast or brisbane area purchases one from you impakt, could you forward my enquiry to them? Would b interested to see if it works with my car. :cheers:

Cheers,

  • 1 month later...
Update: I have ordered some more parts and will have 10 more displays ready to go in a couple of days. 3 or 4 people are already showing interest in this batch of 10 also.

Impakt

If you wish to test it out on a GTT, PM me :)

From what I've seen yes it uses Consult-II as opposed to Consult-I but that's just for actually diagnosing codes and altering data on-board the ECU. But they both use the same base OBD-II language whcih should decode as normal.

Either way I think it's worth a shot just to plug it in and see.

BTW Ed where is the Consult connector in the 34? Just had a quick look around the fuse panela nd couldn't see it????

From what I've seen yes it uses Consult-II as opposed to Consult-I but that's just for actually diagnosing codes and altering data on-board the ECU. But they both use the same base OBD-II language whcih should decode as normal.

Either way I think it's worth a shot just to plug it in and see.

BTW Ed where is the Consult connector in the 34? Just had a quick look around the fuse panela nd couldn't see it????

Should be below the little pocket compartment to the right of the steering column.

Let me know if you need me to take a pic.

Ahhh below the pocket..about the only place that I didn't look :P

I e-mailed Pete from PLMS developments, he said someone with an R34 has ordered one of the interfaces to try...so I'll let you know how it goes when he get's back to me.

Dan

Have you worked out yet how to pull the maps out of the ecu. I'm asking because I've got a r32 gtr mines chipped ecu (glued in chip) and I want to pull the map out of it and knock a little timming of the top rpm points and add a little fuel in the middle and burn a new chip and install it into a standard ecu. Cheaper than buying a pfc since I'm not upgrading inj, afm or turbs. Eeprom reader/writer is only $130 and the softwares free! All I need is the map off the mines.

Nice work thou. Its good to see your sussing it out!

Rowdyr32: Yes with my module, a laptop and the right software you will be able to read the Mines map out of the ECU. My display will work with the Mines Chip too..

The best all 'round program is called Nissan Data Scan, and its $25. THe author of this program can be contacted at [email protected]

Impakt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...