Jump to content
SAU Community

Recommended Posts

Hey guys,

After buying a shell then selling it to another person before I moved my parts over I am wrecking my car.

Its a R32 4 Door with RB26 heavily modified with a RB25 gear box etc... Was making above 500hp with twins at high boost. Engine was recently run and still purrs like a kitten.

Anyway check the parts list as it will be updated often (as I gain spare for parts). I have limited safe space to store, so I need to offload parts as I go in order to keep them protected.

All prices are negotiable (but please do keep it within reason, low balling will be ignored). Also, I would prefer to keep it pick up only (or a courier setup by you) for big parts or anything I deem too fragile to post using Aus Post.

Pictures Here: http://imgur.com/a/mxDHv#0

More will be added as parts are removed/photo taken.
Here is the list:

  • PWR 45mm radiator $300
  • Permacool fuel cooler $100
  • ARE 90mm inter-cooler + custom stainless pipings $250
  • Peterson Catch Can $100
  • Earls external oil cooler + braided lines $300
  • Greddy Type R BOV $180
  • Cusco Front strut brace $90
  • Cusco Rear strut brace $90
  • Nissan GTR aluminium bonnet, N1 lip + bonnet latch $600
  • Nissan GTR grill $120
  • Nissan GTR Front bar $400
  • N1 front bar vents with front bar
  • Greddy radiator deflector $120
  • R32 GTS-T Rims with tyres 2x old slicks, 2x cheap tyres $300
  • Front L and R Lights $300
  • Rear L and R Lights $200
  • Battery $50
  • Boot Lid & Wing $150
  • Rear Bar Yes $150
  • Apexi Pod Filters x2 $150
  • Z32 AFM x2 (were not in car, from another R32 GTR) $200

Many more parts to come... check back for updates!



I can be contacted by replying to the thread, via PMs or by this mobile number: 0439968014
Answering calls can be hard as I work shifts, so feel free to send SMS even after you call, or leave a voicemail and I'll contact you asap.

Thanks,
Ben

Edited by LightAssassin

Hi Ben thanks for your reply and pictures.

Can I plse add rear left door window switch if you have ?

(to the drivers door card, switches and sun visors).

Cheers

Richard

HI Ben, hope your ok and just very busy.

I Haven't heard from you since initial contact.

Could you please answer phone, txts and PM's and let me know if you're still proceeding with the sale of parts, or if your having issues.

Cheers

Richard

Hey,

Yeah sorry, I work shift work and the rain has been holding me back. I can't remove the door until the rain stops. I am also trying to organize packing as I've never posted such a large delicate item.

I'll drop you a SMS on Monday with an update, it should be sorted by next week.

Again sorry for delay, just lots on my plate.

Cheers,

Ben

where abouts you located man? do you still have most of the interior trims?

am chasing:

-drivers side door trim and power window control panel

- all the other window switches in the car

also maybe a few other things check what else i'm after

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...