Jump to content
SAU Community

Recommended Posts

Yeh they do, but think I would rarher get a new turbo first

Good plan! As for fabbing up a FFP, there was one just posted recently in the Build Thread section, i think it was the 2 guys with the 32, go have a look and get some feedback from them?

Its a bit of a vicious circle, to get to 300 kw I will need a new turbo, then probably need a hi mount exhaust manifold, then because of that rework the intake pipework. Just have to work out the best order to buy it all in so I can keep adding to the setup as I go.

Its a bit of a vicious circle, to get to 300 kw I will need a new turbo, then probably need a hi mount exhaust manifold, then because of that rework the intake pipework. Just have to work out the best order to buy it all in so I can keep adding to the setup as I go.

To get 300kw you will need a turbo that will do the job, to get 300kw you will NOT need a hi mount exhaust manifold... You can just run the setup like many have in the past!

Be nice if I didnt have to, looking at getting a hypergear ATR43 SS2 BUT Stao said 280kw is the max from standard ex manifold and internal gate.

So run a bigger turbo on the standard manifold and external gate? I know the Kando boys etc were doing it in that thread? I am sure you can make 300kw low mounted! AND if you want to go aftermarket manifold you will find mobs like 6Boost and Brae make low mount manifolds too (Look at ANGRYRBGTX build thread)... But once again if you dont want to spend $1000 on an intake plenum then I assume you wont want too on an Exhaust manifold either?

It's reaching the limits of the stock exhaust manifold... On 98 at least... ;)

Not that you would notice 20kw less.

I was waiting for you too chime in ;) Fair enough hehe

Well if I go exhaust manifold I will definately see a big improvement for money spent wheras it may not be so significant or needed to for the plenum to hit my goal of 300kw.

Not saying I wont put a FFP on, just need to prioritize my purchases.

dunno what GTS kid just said but look at the GTR, those clever little engineers at Nissan designed the forward facing plenum and that didn't cause "uneven air distribution" as he described.

I agree don't chop it tho, leave it or get a good greddy copy instead

RB26 and RB25 plenums are totally different, if you see on the RB25 there are guides that channel the air from the side into each cylinder, where as a RB26 doesn't have that.

GTS has a very valid point & reason.

My 2cents, people who chop stock plenums are morons.

Both the ffp and aftermarket exhaust manifold will see you defected instantly the minute the bonnet is popped, why not lean on the stock gear as much as possible, you will get to your goal and still look stock if you choose parts correctly.

fuark that's a sexy engine bay LOL.. too bad that cam cover is now matte black :)

Both the ffp and aftermarket exhaust manifold will see you defected instantly the minute the bonnet is popped, why not lean on the stock gear as much as possible, you will get to your goal and still look stock if you choose parts correctly.

I read on the forums somewhere that they weren't in Qld

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...