Jump to content
SAU Community

Recommended Posts

What an idiot!!!

Why is it always supercars and exotic muscle cars that have moron owners attempting to do burnouts / drifting in public places... They ALWAYS seem to spin out and crash. Just like this example. What a complete and utter tool, I hope he pays for all medical and or worst expenses to those he hit.

"From the video, it looks to us that as the CCX broke the rear tires loose and he immediately lifted off the gas and slammed the brakes, which is more often than not, the worst thing you can do in that situation. Perhaps, had he more experience and steered into the slide and stayed on the gas, this could all have been avoided." There you go boys, if in doubt, keep that sucker on the gas and powerslide your way to safety!

Well besides Koenenenccigigig CCXs, theres countless videos of lambo / ferrari / corvette morons who manage to spin them out in even the most normal situations with the slightest pump of the pedal. They should be told these cars are really tail happy when they buy them

There should be laws against rich idiots buying cars they don't know how to drive.

Why restrict it to rich people in expensive cars? Plenty of people lose control of normal cars when doing something stupid, they just aren't doing with big crowd around recording it. But there are plenty of instances where there is someone recording it. YouTube has plenty of videos of people losing it.

I'm sure most people on this forum (and every other forum) wouldn't be able to 'drive' a supercar or hypercar without losing it. Again, I make my point: if someone as skilled as Ben Collins (aka the stig) spun out a CCX, then an average driver (and the average SAUer - including me) would be even more likely to spin out.

"From the video, it looks to us that as the CCX broke the rear tires loose and he immediately lifted off the gas and slammed the brakes, which is more often than not, the worst thing you can do in that situation. Perhaps, had he more experience and steered into the slide and stayed on the gas, this could all have been avoided." There you go boys, if in doubt, keep that sucker on the gas and powerslide your way to safety!

Lol glad someone picked this up.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...