Jump to content
SAU Community

Recommended Posts

Ay yo! Does anyone know how to easily remove the black soot from the rear bumper without using so much elbow grease, or is there a reason why this happens and how can/ if you can stop it.

My engine has been modified with the usual things, or is there something possibly wrong with the engine

I've seen it on other cars as well, that have been modified so wonder if it annoys them just as much.

Questions, thoughts, answers? :geek:

Link to comment
https://www.sau.com.au/forums/topic/428125-black-soot-buildup/
Share on other sites

So is that why i see a lot of white smoke come out of my exhaust when i leave work, i try not to give it gas, but when i even give it the slightest,it spewin out a 40 year olds smokers cough.

I need a mechanical answer to make the engine run right

White smoke... no good... :unsure: I'd get that checked up.

The black stuff should be concentrated around your bumper and boot, might just be because shes running a bit rich. After a wash it takes a few days for that stuff to build up again behind my car, if you leave it on for a long while you'll need to use a clay bar to get it off, otherwise a wash or a wipe with a detailer spray should suffice.

I don't know but i would say it looks more like exhaust fumes, heavy exhaust fumes under load, not white smoke, that was a bit of over exaggeration.

But it looks bad in the rear view and i wouldn't like to be behind me when that happens.

If i got a retune and made it run lean/leaner, would it

A. Reduce the black soot

B. Reduce hp

C. Make the engine struggle for fuel

D. Get more KM's out of a tank of fuel

This is not a game show.

Also just tried a wax and grease remover from repco and WD40 on bumper and came up tits..................that sounds weird.

turtle wax bug and tar remover - best thing i have ever used.

I'm probably one of the most anal people on here when it comes to keeping the car clean and this stuff for this purpose is farken amazing. And completely safe as designed to clean and be gentle on paint.

  • Like 1

turtle wax bug and tar remover - best thing i have ever used. 

 

I'm probably one of the most anal people on here when it comes to keeping the car clean and this stuff for this purpose is farken amazing. And completely safe as designed to clean and be gentle on paint. 

Agreed +1

I tackled this yesturday, i havn't taken before and after pictures because i really didn't know it'd go so well, but my results were brilliant =). I'll just number my steps below:

1. Washed car day before.

2. Quick wipe with microfibre cloth and Meguiars quick detailer to remove loose dirt/soot.

3. Clayed the boot lid and rear bar with Mother California clay bar kit (love it).

Breaking away from the steps, there's something i need to point out. Looking right at the paint, on the boot lid there are many small black spots kinda stuck to the paint, only a clay bar can take it off. My 33 is white so i can see them easily. On the bumper the story is a little different, especially just above the exhaust exit, there seems to be a dark yellow stain covering 45% or so of the bumper. The clay bar takes this off, but very slowly, step 4 REALLY helped here.

4. I applied a bit of Meguiars Paint Cleaner with a foam applicator pad, then polished it with a $60 polisher wearing a woolen pad. I also went over it by hand with a microfibre towel, and the result was exactly what i was hoping for, complete whitenesss! I guess this product can be substituted with the turtle wax bug and tar remover, but i have not tried it for this application.

5. Meguairs Ultimate compound, buff, wipe off.

6. Meguairs nex gen tech wax 2.0.... apply, wait, buff off... mmmmmm sily smooth whitenessssss.

I really love the results, and it did not take too long either, maybe 25mints, and soooo worth it. Now i just need to see how long it lasts and also how easy it will be to remove the next buildup with the wax protecting the surface.

Just to let you guys know, when cleaning headlights its never worth using single products i.e. bug and tar remover, brasso bla bla bla... it might clean it, but after a few weeks yellow fever will hit you back hard, and that is because you have not sealed it back. Get yourself the turtle wax headlight restorer kit and spend 30 mints on it, you'll be much happier in the long run! :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • -10 is plenty for running to an oil cooler. When you look at oil feeds, like power steering feeds, they're much smaller, and then just a larger hose size to move volume in less pressure. No need for -12. Even on the race cars, like Duncans, and endurance cars, most of them are all running -10 and everything works perfectly fine, temps are under control, and there's no restrictions.
    • Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
    • More so GReddy oil relocation kits, sandwich plates, etc. all use 10AN fittings. And same, I've only used 10AN and my car sees track work (circuit, doing laps, not 10 sec squirt business).
    • street use or race track, what hose size and why? what factors change with the hose size options ?   see most comon is an10. when you see most oem external coolers are closer to an12? does high volume oil pump like nitto need an12 or 10 be just fine
×
×
  • Create New...