Jump to content
SAU Community

Recommended Posts

Possibly. I'm not as fussed about my physique as I used to be; guess I'm kinda over it now. I've been lifting weights for long enough that I feel as if I should have achieved my aesthetic goals by now. Birds said I would get a six pack once I did 10 pull-ups... Well I did that, no six pack. It's disappointing and I don't want the frustration to get in the way of my enjoyment of gym; hence why I guess I've turned to the strength aspect rather than looks. I looked much more defined a year ago than I do today, but I am stronger today...

Stop twisting my words female

I said when you were capable of doing 10 pullups...and I mean proper full range of motion pullups...that you would have enough abdominal muscle for a six pack. That doesn't mean you don't have to do the cutting to make it visible.

You are your own harshest critic and also throwing out a lot of ignorance here. I think that if people saw your physique and read what you wrote here they would think you're being a tad unrealistic. Some facts: you're eating literally twice as much as when you say you were more "defined". You're significantly stronger having increased weights by about 50-60%; you have more muscle now, despite training for less than 1/3 the amount of time/sessions that you used to. You've been plagued by injuries over the last couple years that we've had to rehab around. I think you need to add some perspective here before looking to your goals and saying "I give up" or "that didn't work" when you've actually only done half the work to get there.

If you go to the Arnold Classic on the weekend a girl i know will be competing and on a booth answering questions. Her name is Melissa Darmawan i believe she is on the Superior Supplements booth. Have a chat to her, very friendly and informative. You can't miss her she is the giant asian

Another woman you could email/Facebook is Renee Armstrong (i believe that is how its spelt) she either did or does compete on stage and focuses on strength and power lifting. Her fiance owns Bondi Strength.

But obviously she is in nsw

I'm not sure? It was my shoulder that was causing me pain. Basically now I have a lower back hyper extension. Can't walk up stairs properly, can't get in and out of a car without being in pain, stuff like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...