Jump to content
SAU Community

Recommended Posts

hey fellas i'm very interested in doing this mod on my car i just dont know enough about

it. :( is there any picture guides on how 2 do it?

i had my mechanic do an aftermarket boost controller on it but i think its stuffed and its spiking and i'm overfueling cause of it.

help please

hey fellas i'm very interested in doing this mod on my car i just dont know enough about

it. :(  is there any picture guides on how 2 do it?

i had my mechanic do an aftermarket boost controller on it but i think its stuffed and its spiking and i'm overfueling cause of it.

help please

get the mechanic to put it back to stock boost control solenoid/setup then just ground the black wire between the solenoid and plug, seriously its that simple (or tell im to do that) ie cut it and attach it to car body - ground

or even grab one of those turbotec boost controllers in forced induction section $22 thing if u want a few more psi

my r33 just used to sit on 5 psi never went any higher so dont know where the 7psi side of things went but did the mod today took all of about 10 mins and now it goes to 8 psi comes on quicker pulls harder than b4 im rapt mid life crisis

Ok this may seem like a stupid statement,(As i dont actually own a skyline yet) but i always thought that if you upgraded ur exhaust, say 3" turbo back, ur boost automatically goes up. In saying this would this mod still work? Please detail ur answer as im new to the turbo/skyline scene....LoL

Cheers

this mod will still work. boost is a resistance to air, take out the resistance aka bigger exhaust and boost will go up a little as there is less resistisance, so it can flow more but the mod will still apply

this mod will still work. boost is a resistance to air, take out the resistance aka bigger exhaust and boost will go up a little as there is less resistisance, so it can flow more but the mod will still apply

wouldnt the wastegate actuator stop it from going over a set psi regardless of the size of the exhaust?

Thats another thing i was thinking but didnt wanna say...

A larger exhaust (more flow) allows the turbo to spin up easier, and as such faster, here in NZ we rip the insides of our cat convertors out also to create less back pressure...

Yes Yes Yes....I realise this BUT will the actuator/ecu/solenoid etc stop it from gaining the 'automatic' boost you get as a result of putting a bigger exhaust????

I realise the effects of a bigger exhaust on a motor/turbo but will it be electronically restricted?????

well, when i first had the rb25det in my R31, i had the stock 1inch exhuast, and it would only make 5psi of boost, when i put on a 3inch turbo back it did the 5psi, then 7psi after 4000rpm but that is all, the actuator will stop anymore boost from being made. I also install one of them $30 boost controllers, its all pretty damn fine now.

I did this mod last night, and bang me dead its awsome!

can anyone tell me what having this loop does(drawn in red)....cuz in my car the solenoid has a loop...the top one doesnt go where its supposed to go....i need an explanation on what this does....esp cuz am a newbie to skylines...he he ;)

post-23830-1130177360.jpg

wouldnt that be done just to plug up the solenoid..?

can anyone tell me what having this loop does(drawn in red)....cuz in my car the solenoid has a loop...the top one doesnt go where its supposed to go....i need an explanation on what this does....esp cuz am a newbie to skylines...he he :D

wouldnt that be done just to plug up the solenoid..?

the bottom one runs to your wastegate actuator, without this you car will probably boost until the fuel defender cuts in

the top one should run to your inlet piping after the air filter, i blocked mine off (top one) but have since unblocked it and it makes no difference

Edited by Keeper

solenoid.jpg

My setup is abit different from everyone else's. Is it still ok to do this mod since the 2nd solenoid nipple is being used?

And if so, which wire goes to ground, white or black?

  • 2 weeks later...

This mod looks great!

Just thought I'd ask if anyone had successfully done this on an R34?

I would guess that it would be almost identical procedure?

I have noticed that on the R34 boost is limited in 1st and 2nd gear, getting the full dose in 3rd through 5th. Would this mod "rectify" this boost cut in lower gears? Thanks guys!

  • 4 weeks later...
Never mind - i've sorted it myself - i've purchased the following:

http://dseau.resultspage.com/search.php?p=...34&site=&w=7701

for anyone that doesn't know anything about electronics you need a SPDT switch which is the following:

SP = Single Polarity - DT = Dual Throw - which pretty much means that if you flick it one way 1 thing turns on - flick it the other way the other thing turns on..

good luck!

Just purchased one of these things and about to give this a shot.

On the back it's got three pins. 1. 2. 3.

is it

1. Wire leading to ECU

2. Wire leading to actuator

3. Wire leading to ground

Have I got it wrong?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...