Jump to content
SAU Community

Recommended Posts

Hey just thought I'd share my experience with you all. BSA wheels peakhurst sydney, custom makes hub centric wheel spacers right up to 80mm for nissan skyline. I got mine done today for 200$ custom made right on the Cmc machine, that includes fitting too about 3 hrs and they where ready, he can make what u want I'm happy extremely happy with this guys work

Link to comment
https://www.sau.com.au/forums/topic/428951-custom-wheel-spacers-sydney-d/
Share on other sites

Yea they are because there the bolt on type ADR approved ! I'd say if you have the wheels bangin out the gaurds that's illegal but I got 30mm hub centric made and I have a wicked offset i think the slip ons are illegal the hub centric legal not 100% tho.

Yea it's for a pair including fitting 80mm is nuts he told me he can do I but and I was laughing going that would be insane on a skyline the bloke even re threaded my wheel threads with his cutting tool all for 200$

No there hub centric meaning there is a special ring around them that locks onto the lip on your car so there is not pressure on the threads at all ever there perfectly safe. Slips ons are dangerous

yeah ummmm no!!

Hahahahhaaha that better not happen do you no anyone it happened to I don't understand cos all the racing cars use them.

Yes, Sheene

There are many recorded occurrences due to hubcentrics.

I have worked on a Race car. It didn't use them. Invalid statement is invalid.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...