Jump to content
SAU Community

Recommended Posts

Hello im from sweden, i join this forum becuse my problem.

I have a Skyline R33 GTST RB25det 1994.

I cant get my sparks wet with fuel? sometimes 1 or 2 sparks get wet but not the other one.

Okay, im not a idiot, hehe, i have check this things:

- New Whalbro fuel pump.

- New Jecs 720cc injectors.

- New plenum intake.

- Kompression 12kg at all cylinders = OK.

- Fuel in the tank, 1/2 tank.

- I get fuel to the injectors.

- i have remove the injectors and rail and try it, and all injectors work fine (spray nice).

- The cams are right, even the crank.

- i have look at the CAS, even meet it up with a multimeter (voltage/ohms 600) and its seems to work nice.

But, im thinking about the fuel pressure, the injectors want 3bars pressure, how mutch is it with the original fuel pressure "sensor"?

Im thinking to change this but i dont know if i need, its seems to be okay pressure now to, and all the 6 injectors open nice.

But i can't get all sparks wet? The engine dont start becuse this, with startgas the engine want to run but it need more fuel.

If it take in air between engine/intake, could it make this problem to?

Hope all understand my english, im not best at it..

// Emiiilz from Sweden. :)

Edited by Emiiilz

hmm i mean.. When you check if the engine get fuel you check the spark, if the spark are wet/dry with fuel its get fuel into the engine.

Hope you understand what i mean. I can't understand why, becuse the injectors work and spray, i thinking about the fuel pressure, but

original its should be 3 bar and thats most be enugh? injectors want 3 bar.

I think he is trying to say that his spark plugs are not getting "wet" as in no fuel is being injected into the cylinders. When he uses start ya bastard or similar to try and start it it works.

Has the car been running fine before this, and the problem has just started? Or have you just put a new engine in etc?

It sounds a lot like the fuel lines have been hooked up backwards, which is fairly easy to do and a very easy fix :)

<p>He already said he took Injectors out and they spray fine....but he hasn't said if ecu is upgraded to match 720 injectors...though if it isn't they would be dripping wet..lol </p>

thanks for the help but i have try all this allready. The map is for 720cc injectors, i get it from Haltech, i run that ECU.

i have try others map to but no diffrence. And the fuel lines are right and the whalbro pump is cable into the stock harness.

i have try to put the ignition coils out to and try but no diffrence. i cant just understand this...

As I asked before. Was the car running fine before these upgrades or have you never had this car running?

sorry i miss this. Yes the car run before but then its was nearly original in the engine, i have rebuild the engine now with some

parts like Haltech Ecu/mainfold/turbo/plenum intake/injectors/engine gasket 1.3mm/exahust/intercooler and more things...

I have a failure code at the TPS, i cant se voltage in the computer at it, but can this have with my problem to do really?



Now the car start? i have dont do nothing, the car just start when i turn the key?? icon_question.gificon_eek.gif
And its go nice?? i have drive the car and its work fine, haha whaat? icon_question.gif
okay, im very happy but i cant understand this problem.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...