Jump to content
SAU Community

Recommended Posts

Hey all,

Just want to know if anyone has a venom cat installed on their GTT, GTS-T, or GTR?

Looking for a good high-flow metal cat. Made the mistake of getting a ceramic one, but luckily can return it. Venom cat has been recommended to me, and I just want to know any more details about it, if it's a good cat?

Website says the 5" body one is $230, but on ebay the 4"body is $250. Sooooo i don't really know what the go with the price is. I've emailed Venom though, so awaiting a reply.

Any info would be awesome thanks :D

Link to comment
https://www.sau.com.au/forums/topic/429215-venom-catalytic-converter/
Share on other sites

Awesome, cheers guys.

Martin, I see you have a GTT. How much did the 5" 100 cell cost you? And I also see you've got it bolted up to a JJR dump pipe. I'm also using that dump pipe, just wondering if it's a direct bolt on to the cat, or if the flanges need to be modified to line up?

Thanks! :D

Awesome, cheers guys.

Martin, I see you have a GTT. How much did the 5" 100 cell cost you? And I also see you've got it bolted up to a JJR dump pipe. I'm also using that dump pipe, just wondering if it's a direct bolt on to the cat, or if the flanges need to be modified to line up?

Thanks! :D

From memory I paid $160... But I got mine without flanges, they weren't offering the bolt-on version when I got mine. So I guess that answers your second question as well haha. It only cost me $40 to have two flanges welded on, and that guaranteed perfect fitment.

i got a 100cell 5" body cat, with 3" inlet and outlet, was told it was a direct bolt on, for r33 and 180 apparently take the same cat...

i connected mine up with a jjr tront/dump but didnt fit, the dump pipe needed to be heated and twisted, and flanges aligned to fit,

thought it was just my car as the exhaust shop said it was the front dump rather than cat,

but my bro with his 180 had the same prob, so i think they had an issue with their cats, i did contact george about it and he was really good,, he said he'd look into their design,

even though it wasnt a direct bolt on im still really happy with it.

From memory I paid $160... But I got mine without flanges, they weren't offering the bolt-on version when I got mine. So I guess that answers your second question as well haha. It only cost me $40 to have two flanges welded on, and that guaranteed perfect fitment.

Oh ok, i just had another look and the one on ebay has the flanges on them already, whereas the ones shown on the venom website don't look like they come with the flanges.

i got a 100cell 5" body cat, with 3" inlet and outlet, was told it was a direct bolt on, for r33 and 180 apparently take the same cat...

i connected mine up with a jjr tront/dump but didnt fit, the dump pipe needed to be heated and twisted, and flanges aligned to fit,

thought it was just my car as the exhaust shop said it was the front dump rather than cat,

but my bro with his 180 had the same prob, so i think they had an issue with their cats, i did contact george about it and he was really good,, he said he'd look into their design,

even though it wasnt a direct bolt on im still really happy with it.

How long ago did you have it installed mat? Hopefully he's fixed the design. Otherwise, I could just opt for the flange-less one and get the exhaust guys to weld on some flanges like Martin did.

Oh ok, i just had another look and the one on ebay has the flanges on them already, whereas the ones shown on the venom website don't look like they come with the flanges.

How long ago did you have it installed mat? Hopefully he's fixed the design. Otherwise, I could just opt for the flange-less one and get the exhaust guys to weld on some flanges like Martin did.

ummm i think late last year somewhere around sept oct.

I've got one too, the metal core is welded to the body so it won't dislodge itself.

I'm running the 5" body 100 cell cat, George even welded me a bung pre cat for my wide band for free.

Great quality product, tidy welds and good Service.

I also run a 5" one with 3" flanges. For the sake of an extra couple of dollars go with the 5", you want the least amount of restriction possible.

The only problem I had with my Venom Cat is I had ordered it as direct bolt on with a bung to fit the standard temp probe. George said the standard fitting they use is a larger diameter than the Nissan fitting, so I paid extra (through George) for an adapter to space it down to the correct diameter. But as it turns out that didn't work as there was no internal base to seat the probe. So in the end I haven't been able to fit the probe and wasted money in the process.

I also run a 5" one with 3" flanges. For the sake of an extra couple of dollars go with the 5", you want the least amount of restriction possible.

The only problem I had with my Venom Cat is I had ordered it as direct bolt on with a bung to fit the standard temp probe. George said the standard fitting they use is a larger diameter than the Nissan fitting, so I paid extra (through George) for an adapter to space it down to the correct diameter. But as it turns out that didn't work as there was no internal base to seat the probe. So in the end I haven't been able to fit the probe and wasted money in the process.

I noticed this as well with the previous generation of his Cats, however he supplied a step down convertor for free and it fit well when we fitted it to Ph@t-G's car.

The cat I ordered for myself now has the correct sized fitting and the OEM temp probe fits perfectly, in saying that those probes are useless :D

  • 11 months later...

Thread resurrect. How do you guys go with ground clearance using the 5" Venom cat? I'm tempted to get one for my R34 GTT but I'm already scraping the smaller X-Force high flow (ceramic) I've got in there...

havent looked under my car for a while but its pretty much the lowest part i think, but i dont scrap it anywhere except one multistory, but im not sure if its the frontdump or the cat scaping and then its only a touch....
i guess if you know the height of your cat, you can work out how much lower its going to sit

Edited by MatthewT85

Thread resurrect. How do you guys go with ground clearance using the 5" Venom cat? I'm tempted to get one for my R34 GTT but I'm already scraping the smaller X-Force high flow (ceramic) I've got in there...

The cat in mine sits higher then the centre muffler, its not as big as it sounds! Mine was just the cat and flanges and we welded it into place so it may vary slightly to the off the shelf ones that are made to bolt up?

more of an update.. my venom cat is still in one piece!

that's with me cracking the anti-lag and hitting the rev limiter often too (I use ignition cut).. loads of bangs, still loads of cat :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...