Jump to content
SAU Community

Recommended Posts

Synx 3000 is definitely not a crappy oil. And I did mention stock M35... I would still run it in mine without hesitation. Whacky logic? Ok... Sure... There are plenty of Stagea's running around on it without issue.

We are driving low priced cars now, I was offered a working Stagea for 6k the other day... If you feel the need to blow $170 on an oil change, go right ahead.

Synx 3000 is definitely not a crappy oil. And I did mention stock M35... I would still run it in mine without hesitation. Whacky logic? Ok... Sure... There are plenty of Stagea's running around on it without issue.

We are driving low priced cars now, I was offered a working Stagea for 6k the other day... If you feel the need to blow $170 on an oil change, go right ahead.

Synx 3000 is a only semi-syn, and AFAICT GW don't publish HTHS specs either. Running a semi in a turbo car is not worth it IMO.

By whacky logic, i mean that you're suggesting a shorter OCI (which is more conservative) but a lower grade of oil (which is less conservative). To me that combo is mixed up.

No need to blow $170 when the Valvoline and Shell are in the $60-65 range, and you can get 6 quarts of American M1 on ebay (so no Australia tax) for $70.

What's wrong with a semi, better than running around with a raging boner...

US spec M1, isn't that a 0w? Go for it I say, see if you logic holds... I will stick to what works.

Very interesting read on oil if you have the time to read the article...

http://www.evolutionoz.net/forums/index.php?showtopic=87122

Can't read; Emo forum wants me to be their friend.

I thought Emo's were happy alone?

  • 4 weeks later...

How much does the Neo cost? Unless its cheap I would just get the same weight in something else full synth. Its good, but there's plenty of good oils around.

Neo's about 120 for 5 lts.....but its good for 8-15k on a standard setup.

Ouch. On most motors if you're paying that much you'd be better off with Redline or Motul 300V which IMO are better oils at about the same price. Maybe the neo additive pack works particularly well with the vq25det?

its just whats in it at the moment, 2nd change since new turbo,thought i stick with it as i do give it alot on a regular basis. i dont like 5k intervals. i like 8-10k

Ouch. On most motors if you're paying that much you'd be better off with Redline or Motul 300V which IMO are better oils at about the same price. Maybe the neo additive pack works particularly well with the vq25det?

huh? Tried redline.....the 32 burn's it......while Motul is good it still doesn't match up to the Neo. The last time we used Motul it came out of our engine pretty black.....the Motul always comes out clean.

The Neo comes out clean I assume?

Clean means the detergents aren't working well, which probably means it is more of a race engine oil.

this is correct

huh? Tried redline.....the 32 burn's it......while Motul is good it still doesn't match up to the Neo. The last time we used Motul it came out of our engine pretty black.....the Motul always comes out clean.

How did you make the assessment that it was burnt? Or do you mean you had to top up?

In what way did the Motul not match up to the Neo?

Figured out it didn't stand up as well the same way we do it at the end if every race meeting. Dumped it and sent it for sampling.

I've used Liqui-Moly LEICHTLAUF SPECIAL LL 5W-30 for about the last 15000km at 5000km change intervals. My car's very close to stock with 70000km. Never had any problems with this oil, as far as noise or consumption goes, and happy with performance. It's long-life approved for BMW, MB, VW etc, but I just use it cause we only use Liqui-Moly at work and it's the one their website recommends for our engine. I get the LL for free but if I wanted to pay and probably after car gets nearer to 100k I think ill put the LEICHTLAUF HIGH TECH 5W-40 in.

I'd recommend Liqui-Moly oils to anyone but I wouldn't try change your mind at all if you've found a brand you like and trust.

  • 2 months later...

one enthusiast in Russia made a great job

it's not close to you, because our oils are too different, even when they have same names

but it's GREAT. use google translate and look at pics. take a pleasure at looking

i found this one some months ago, and happy that run the Aimol 5-40 oil since 2008 on my third Stagea now. 240000 km on it on current car.

http://bmwservice.livejournal.com/27699.html?page=8&cut_expand=1

  • 2 months later...

Analysis of Valvoline Syn Power 5W-40 below. OCI was 5500kms. I found out from the manual that the factory OCI is 5000kms not 10000kms.

Interesting points are;

- High silicon - my guess is that this is due to the horrible old air filter that was in the car when i bought it. Will check again to see if this has come back to normal next change

- The oil has sheared down to a 30 weight. Not a particular problem in itself since there is no abnormal wear, and Nissan speced down to a 0W-20 for the motor. However, all the info i see here and on BITOG is that VQ motors are tough on oil. The loss of viscosity supports that, however, I dont know how shear stable SynPower is. FYI the published viscosity for SynPower is 13.9, after 5500kms its at 11.9.

- TBN is still really high at 9.1, most are happy to run down to about 1 before condemning the oil. This is an indicator of additive level. Additives get used up in use.

gallery_15274_5500_9757.png

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...