Jump to content
SAU Community

Recommended Posts

I am not going to try any more. I am not an internet theorist. I am an engineer whose work rather deeply involves aerodynamics, particularly flow in ducts. You can tell when someone who doesn't know abotu air flow at all starts posting abotu this stuff because they start talking as if boost has something to do with it (ie there's a difference between turbo and NA air flow - which there isn't really until you start getting into the detail of flow inside the ports in the head). Or they start to carry on about how their tuner didn't notice X or Y, but when asked if the tuner had individual exhaust temperature probes, the answer is always "no".

Cut open the upper plenum of an RB, or an old 7M, or even the plenum off a 2J or SR20. Look at the strange lumps and bumps involved in the casting on the inside of the chamber. If you can't point to a bolt or other clearance issue on the outside of the plenum as the reason for a bulge on the inside, then it's a fair bet that some switched on OEM engineer put that lump there to alter the air flow inside the plenum to achieve a goal of some sort - probably to balance the flow between runners. There is a hell of a lot that goes into designing this stuff properly that people who are uninformed of it would never imagine is possible. I spent $100k of CFD computer and engineering time doing a plenum design job for a kaolin calcination kiln to get the air into the process in the best possible way. Alright, I didn't spend the money. The client spent the money. I did the work.

That's nice that you are educated GTSboy im sure your mummy is proud of you too...

But believe it or not I do know about the lumps inside the plenum and what they are there for..and i didn't even finish high school. :woot:

I also know there is plenty of cars around making power with these plenums so unfortunately your argument, while somewhat "educated" is not really being proven 100% correct yet

Now the only point I was trying to make is that there is alot more pressure in the plenum of a boosted car than that of a NA..i don't remember ever hearing of an NA car blowing the welds on the intake...doesn't it make sense that this pressurized air is going to make its way out of or into any opening (hopefully the valves) that it can make its was into...

Now while.it might not technically be the most efficient way of doing things it seems to me that it can indeed work well enough as I am yet to hear of an engine that blew up just because it had a cut n shut plenum...

Without individual cylinder temperature probes it would be difficult to know if its working right or not. The AF at the tailpipe is basically an average across all 6 cylinders, and you need the temp probes to tell you which is literally running hotter (leaner) than the others.

In this case I know there are cars where this is known to work FINE, and others where it is not so fine.. I am unsure on the verdict for an RB25.

What I do know is I am about to start fixing a car with this EXACT plenum cut and shut job. I will take photos when I do... The motor has been looked after but has gradually spun a bearing AND fried the fire rings on one or more cylinders. I am looking forward to seeing the piston crowns once I crack it open... I am fearful that some cylinders will present leaner than others.

I will report back in due time. If anyone is specifically wanting to know about this (long term) and doesn't hear back from me in 3 months drop me a PM and I will update my findings at that stage.

But believe it or not I do know about the lumps inside the plenum and what they are there for..and i didn't even finish high school. :woot:

Now the only point I was trying to make is that there is alot more pressure in the plenum of a boosted car than that of a NA..i don't remember ever hearing of an NA car blowing the welds on the intake...doesn't it make sense that this pressurized air is going to make its way out of or into any opening (hopefully the valves) that it can make its was into...

Now while.it might not technically be the most efficient way of doing things it seems to me that it can indeed work well enough as I am yet to hear of an engine that blew up just because it had a cut n shut plenum...

Responses to the various paragraphs in your post.

1) OK, then do tell what you know about the function of these lumps and bumps.

2) No. Wrong. Pressure has NO EFFECT. Air flow is air flow. Until you can grasp that, you are labouring under a massive misapprehension as to how this stuff works. Sure, the absolute value of the static pressure in a flowing gas will change the gas properties a bit, which will tend to influence the thickness of the boundary layer and a few other such things. But it does not change the nature of the flow patterns at all. Not one bit.

3) A motor does not have to blow up to be working not as well as it could if the plenum were working properly.

No. RBs are "freaking easy to kill" when you do things the wrong way. Limiter bashing is the wrong way. Smashing ceramic turbines into the engine is the wrong way. Leaning out on old fuel pumps is the wrong way. Revving them hard without dealing with the oil pump drive or the CAS scatter is the wrong way. Randomly upsetting the flow into the inlet manifold runners is the wrong way. Sure, some people's bodgy mod might work OK. Others might not. Unless you've properly tested the result of a mod to the plenum you can't claim it is fine.

I could suggest a lot of mods to plenums that I would be happy to implement without testing because it is a very fair bet that they won't upset the flow. Making the plenum very large, for example, will almost certainly do nothing bad for distribution. Might not be great for response, but that's not the point. Making it smaller, or randomly aiming the incoming air at some other point in the plenum are not what I would call sensible without an instrumented test afterwards. Hell, I wouldn't even trust a Plasmaman type plenum unless they could show me that they'd done some reasonable testwork during development (and preferably that they'd had problems with distribution on some prototypes and found solutions to them - it's hard to trust "we got it right the first time"). Sure, there may be a big installed base of engines out there with Plasmaman plenums on that you can point to as proof that it works......but I'd still like to see at least one of them report all the exhaust temps (and show that the injectors were all within a little margin of each other and there were no cylinder trims in effect) before believing that they aren't all limping along with some flow distribution problem that is being masked by the tuning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...