Jump to content
SAU Community

Recommended Posts

I am not going to try any more. I am not an internet theorist. I am an engineer whose work rather deeply involves aerodynamics, particularly flow in ducts. You can tell when someone who doesn't know abotu air flow at all starts posting abotu this stuff because they start talking as if boost has something to do with it (ie there's a difference between turbo and NA air flow - which there isn't really until you start getting into the detail of flow inside the ports in the head). Or they start to carry on about how their tuner didn't notice X or Y, but when asked if the tuner had individual exhaust temperature probes, the answer is always "no".

Cut open the upper plenum of an RB, or an old 7M, or even the plenum off a 2J or SR20. Look at the strange lumps and bumps involved in the casting on the inside of the chamber. If you can't point to a bolt or other clearance issue on the outside of the plenum as the reason for a bulge on the inside, then it's a fair bet that some switched on OEM engineer put that lump there to alter the air flow inside the plenum to achieve a goal of some sort - probably to balance the flow between runners. There is a hell of a lot that goes into designing this stuff properly that people who are uninformed of it would never imagine is possible. I spent $100k of CFD computer and engineering time doing a plenum design job for a kaolin calcination kiln to get the air into the process in the best possible way. Alright, I didn't spend the money. The client spent the money. I did the work.

That's nice that you are educated GTSboy im sure your mummy is proud of you too...

But believe it or not I do know about the lumps inside the plenum and what they are there for..and i didn't even finish high school. :woot:

I also know there is plenty of cars around making power with these plenums so unfortunately your argument, while somewhat "educated" is not really being proven 100% correct yet

Now the only point I was trying to make is that there is alot more pressure in the plenum of a boosted car than that of a NA..i don't remember ever hearing of an NA car blowing the welds on the intake...doesn't it make sense that this pressurized air is going to make its way out of or into any opening (hopefully the valves) that it can make its was into...

Now while.it might not technically be the most efficient way of doing things it seems to me that it can indeed work well enough as I am yet to hear of an engine that blew up just because it had a cut n shut plenum...

Without individual cylinder temperature probes it would be difficult to know if its working right or not. The AF at the tailpipe is basically an average across all 6 cylinders, and you need the temp probes to tell you which is literally running hotter (leaner) than the others.

In this case I know there are cars where this is known to work FINE, and others where it is not so fine.. I am unsure on the verdict for an RB25.

What I do know is I am about to start fixing a car with this EXACT plenum cut and shut job. I will take photos when I do... The motor has been looked after but has gradually spun a bearing AND fried the fire rings on one or more cylinders. I am looking forward to seeing the piston crowns once I crack it open... I am fearful that some cylinders will present leaner than others.

I will report back in due time. If anyone is specifically wanting to know about this (long term) and doesn't hear back from me in 3 months drop me a PM and I will update my findings at that stage.

But believe it or not I do know about the lumps inside the plenum and what they are there for..and i didn't even finish high school. :woot:

Now the only point I was trying to make is that there is alot more pressure in the plenum of a boosted car than that of a NA..i don't remember ever hearing of an NA car blowing the welds on the intake...doesn't it make sense that this pressurized air is going to make its way out of or into any opening (hopefully the valves) that it can make its was into...

Now while.it might not technically be the most efficient way of doing things it seems to me that it can indeed work well enough as I am yet to hear of an engine that blew up just because it had a cut n shut plenum...

Responses to the various paragraphs in your post.

1) OK, then do tell what you know about the function of these lumps and bumps.

2) No. Wrong. Pressure has NO EFFECT. Air flow is air flow. Until you can grasp that, you are labouring under a massive misapprehension as to how this stuff works. Sure, the absolute value of the static pressure in a flowing gas will change the gas properties a bit, which will tend to influence the thickness of the boundary layer and a few other such things. But it does not change the nature of the flow patterns at all. Not one bit.

3) A motor does not have to blow up to be working not as well as it could if the plenum were working properly.

No. RBs are "freaking easy to kill" when you do things the wrong way. Limiter bashing is the wrong way. Smashing ceramic turbines into the engine is the wrong way. Leaning out on old fuel pumps is the wrong way. Revving them hard without dealing with the oil pump drive or the CAS scatter is the wrong way. Randomly upsetting the flow into the inlet manifold runners is the wrong way. Sure, some people's bodgy mod might work OK. Others might not. Unless you've properly tested the result of a mod to the plenum you can't claim it is fine.

I could suggest a lot of mods to plenums that I would be happy to implement without testing because it is a very fair bet that they won't upset the flow. Making the plenum very large, for example, will almost certainly do nothing bad for distribution. Might not be great for response, but that's not the point. Making it smaller, or randomly aiming the incoming air at some other point in the plenum are not what I would call sensible without an instrumented test afterwards. Hell, I wouldn't even trust a Plasmaman type plenum unless they could show me that they'd done some reasonable testwork during development (and preferably that they'd had problems with distribution on some prototypes and found solutions to them - it's hard to trust "we got it right the first time"). Sure, there may be a big installed base of engines out there with Plasmaman plenums on that you can point to as proof that it works......but I'd still like to see at least one of them report all the exhaust temps (and show that the injectors were all within a little margin of each other and there were no cylinder trims in effect) before believing that they aren't all limping along with some flow distribution problem that is being masked by the tuning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...