Jump to content
SAU Community

Recommended Posts

I'm after new O2 sensors for a Stagea 260RS (R33 RB26DETT) and judging by James' page (great page James) there is a Bosch alternative. I'm not a fan of cutting and joining wires. I wonder if the pins on the plug it comes with can be removed and put into the stock nissan plug. ANyone tried?

yes thats exactly how we did it. remove and replace the pins from the factory plig for the rear o2 sensor

Good stuff! Do you know which sensor it was that you ordered? Was it the Bosch one that's listed on James' page or something else?

Cool, thanks Duncan. I've got onto Global Spares to get two of the sensor quoted for the front. Let's see what they come up with..

Cheers

I read every page of this thread and found one post I think from a pilot who quoted a price of $256.00 for the pair of r33GTR o2 sensors, I think from Global auto spares,but I can't find it now ,anyone see that.Grey Pearl.
I read every page of this thread and found one post I think from a pilot who quoted a price of $256.00 for the pair of r33GTR o2 sensors, I think from Global auto spares,but I can't find it now ,anyone see that.Grey Pearl.
Further to my last post I rang Global Auto Spares and the numbers that keeper gave us for the GTR33 O2 SENSORS APPEAR TO BE WRONG,probably because the guy at global gave him the wrong info.

Apparently the correct global order no info for gtr33's is front:351-0019 $77.00 and rear 351-0019a $145.00 and apparently direct fitment no need to change plugs or wiring.Can anyone tell us if you have bought these items from Global and they fit??Cheers Grey Pearl.

Further to my last post I rang Global Auto Spares and the numbers that keeper gave us for the GTR33 O2 SENSORS APPEAR TO BE WRONG,probably because the guy at global gave him the wrong info.

Apparently the correct global order no info for gtr33's is front:351-0019 $77.00 and rear 351-0019a $145.00 and apparently direct fitment no need to change plugs or wiring.Can anyone tell us if you have bought these items from Global and they fit??Cheers Grey Pearl.

That part number is the same as what James has listed for the R32 GTR. If I'm not mistaken, the R32 uses a small size thread than the R33. I guess you could get one of those adapters. They're both Titania though aren't they (correct me if I'm wrong).

That part number is the same as what James has listed for the R32 GTR. If I'm not mistaken, the R32 uses a small size thread than the R33. I guess you could get one of those adapters. They're both Titania though aren't they (correct me if I'm wrong).
I really don't know I just quoted the part no's that keeper gave us and questioned Global over it as much as I could before he said he was too busy and had to go.He said it was definately the right fit up for gtr33 but now that you say that the numbers are the same as for gtr32 I know it's not a direct fit and now wonder which ones Duncan has been using for gtr33's.Cheers Grey Pearl.

33 gtr is the larger thread and 32 gtr the smaller. they output the same voltage so they are interchangeable - the ones you need depend on the dump pipe you are using, and most (all?) aftermarket dumps take the r33 size fittings.

ngk part # for r33 is OTD2F-P1P. direct fit for front sensor (3 pin plug).

They incorrectly show the same part# for r32

  • 2 weeks later...
  • 3 weeks later...

I have asked this in another thread

http://www.skylinesaustralia.com/forums/Ro...Ne-t223543.html

- but does the NGK O2 sensor for the R33 fit the R34 RB25DET Neo engines? appears it might but no one has 100% confirmed this in this thread...

Also could the air flow sensor also cause rough idle and high fuel consumption or is this purely the O2 sensor failure that causes this?

I have changed the Spark plugs already and the oil...

Amongst many other things, a rough idle could be the AFM itself, or an inbound air leak past the AFM. This particular problem (not saying this is yours though) is unmetered air passes into the system and the ECU is out of whack because [AFM recorded air flow] \= [actual air flow]

Fuel consumption is prob O2 sensor. From memory, if the AFM is stuffed, the car will have trouble even idling properly, let alone causing high fuel consumption. My experience is with RB26 though, so when one of my AFMs died the car could keep running.

FWIW.

Ok confirmed 100% wrong connector on the NGK O2 sensor for use with the R34 - I will solder the existing connector onto the sensor and hope it works...

BTW - my existing O2 sensor had a stack of black soot on the tip - what would this tend to indicate?

Well the NGK connector is light Grey and more solid looking with all the spade pins Vertical and positioned in the center of the connector. The R34 or BOSCH connector is black, maybe a fraction smaller and all the spade pins are Horizontal and thinner and positioned in the top area of the connector.

Might take some shots if I get around to it...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
  • Create New...