Jump to content
SAU Community

Recommended Posts

I have just done a single turbo conversion on my GTR so I have some stock parts for sale
Parts are from a 2000 R34 GTR with 93,000kms

Available for pick-up or post at additional costs
Pick-up in Kallangur, North Brisbane

Call during standard working hours 8am - 6pm on 0488083818 or PM on here for any additional info

More to be added in the coming days.....

BNR34 Stock fuel pump and lines $60

post-25424-0-61529800-1378289062_thumb.jpg

BNR34 Fuel rail / Injectors / Stock FPR $250

post-25424-0-77150100-1378289096_thumb.jpg

BNR34 Stock Turbo's, Manifolds, M's pod filters, Standard AFM's, All pipes (Inc a custom Stainless twin 3" into 3 1/2" front pipe)
Turbo's are in perfect working order and made 257kw @ less than 1 bar on my stock BNR34 the day they were removed (Dyno sheet can be provided) $1200

post-25424-0-67522000-1378289141_thumb.jpg

BNR34 Stock Suspension, removed @ 90,000kms

Perfect working order, no knocks etc $200

post-25424-0-92999800-1378290506_thumb.jpg



Link to comment
https://www.sau.com.au/forums/topic/431362-r34-gtr-parts/
Share on other sites

  • 3 weeks later...

Once again all parts are off my 2000 BNR34

AFM's $100ea or $150/pr

post-25424-0-54948200-1380343707_thumb.jpg

Cams & Cam Gears $100

post-25424-0-10421000-1380344058_thumb.jpgpost-25424-0-85454000-1380343919_thumb.jpg

ECU $250

post-25424-0-48845300-1380344129_thumb.jpg

FRP Front Bumper Vents $200

post-25424-0-83437900-1380344883_thumb.jpg

Rear Bumper Lights $200

post-25424-0-83004900-1380344941_thumb.jpg

Turbo's, Manifolds, Dumps with stock actuators & O2 sensors $400ea or $700/pr

post-25424-0-96757800-1380344983_thumb.jpgpost-25424-0-24045700-1380345059_thumb.jpg

Custom Stainless twin 3" into 3.5" Front Pipe $300
post-25424-0-68112200-1380345108_thumb.jpg

post-25424-0-30182900-1380345132_thumb.jpgpost-25424-0-20430300-1380345156_thumb.jpg

M's Pod Filters $50

post-25424-0-42526200-1380345186_thumb.jpg

Orange Side Fender Indicators $20
post-25424-0-02188100-1380345249_thumb.jpg

Orange Front Indicators $25

post-25424-0-87229600-1380345218_thumb.jpg

Twin Turbo Pipe $80

post-25424-0-76330800-1380345286_thumb.jpg

Items located North Brisbane, Prices are for Pick-up
0488083818

Cheers
Noy

Link to comment
https://www.sau.com.au/forums/topic/431362-r34-gtr-parts/#findComment-7042415
Share on other sites

  • 2 months later...

Bump, New Prices

Rail & Injectors $200
Standard Fuel Pump $50
ECU $200
AFM's $100/pr
FRP Bumper Vents $100
Fog & Reverse Lights $100
Turbo's, Dumps & Manifolds $500/pr or $300ea

Link to comment
https://www.sau.com.au/forums/topic/431362-r34-gtr-parts/#findComment-7155081
Share on other sites

  • 4 weeks later...

AFM's & Stock Suspension have gone..

Items still available
Fuel Rail & Injectors $200
Stock Fuel Pump $50
ECU $200
Bumper Vents $100
Fog & Reverse light $100
Turbo's, Dumps & Manifolds $500/pr or $300ea
Twin Turbo Pipe $50

Additional Items
Stock 34 GTR Rotors F & R $100
Momo F1 steering wheel & boss kit originally came in the 34 GTR $100
Personal steering wheel & boss kit off 33 GTR $50

Link to comment
https://www.sau.com.au/forums/topic/431362-r34-gtr-parts/#findComment-7176422
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...