Jump to content
SAU Community

Recommended Posts

i have a 1993 r33 gtst. since the hicas light came on my steering has become hard and i read here that taking out the hicas system and replacing it with a hicas elimination bar helps. so 2 weeks ago i did just that. I followed the guideline as it was posted on here but my steering is still hard and the hicas light is still on. anyone got any suggestions

Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/
Share on other sites

R33 hicas is not mechanical, it's electrical - your getting the hicas is in limp mode, lets stiffen the steering wheel crap... If you have stock ecu try doing the HICAS diagnostics test - there should be a thread about it on this forums!

Ps: my car does it to, i got used to it, so over trying to fix it (I can't run diagnostics because I have a microtech ecu)

Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7020707
Share on other sites

use search.

i believe there is a green cable on the hicas ecu that you snip. this disables hicas all together. yours is still enabled but locked. so will throw fault codes. diagnostics will not help you.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7024966
Share on other sites

On a 32 its the green wire.

Under the parcel shelf theres a little box with wires, but i dunno about 33.

Sooo... Can I cut the green one yet! :devil:

Light still always on, completely been removed & lockbar fitted.

Edited by ZRBE
Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7025393
Share on other sites

yep diagnostic didnt work so now i will look for the green wire. just to be sure it is the green wire for the r33

search mate this topic has been covered lots and lots of times. and recently as well.

Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7028381
Share on other sites

  • 1 month later...

Why search when you can ask a question then wait ages for someone to maybe respond?

so did this fix it? if you have fixed it, just let us know what it was. another site member is having the same issues.

Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7075115
Share on other sites

Here:

http://www.skylinesaustralia.com/forums/topic/428671-diy-stop-hicas-warning-light-without-bulb-removal/

no dodgy bulb removal bs

and there could be multiple reasons why your steering is heavy.. either HICAS ECU dead, fuse blow, steering rack sensor is fuarked, no power steering fluid etc..

Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7075159
Share on other sites

Why search when you can ask a question then wait ages for someone to maybe respond?

well as u can read above I have a 1993 r33 gtst. after replacing hicas with a lock bar the light was on and my steering was heavy. checked everything but nothing worked. however after seeing the post by DIY MIK I snipped the green wire with a solid white line and now theres no light or heavy steering

Link to comment
https://www.sau.com.au/forums/topic/431859-removed-hicas/#findComment-7077430
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...