Jump to content
SAU Community

Recommended Posts

I have a R31 skyline running a stock rb20det from a r32 with a JJR dump pipe. Its running dual thermos on a stock aus spec radiator (fairly old). Just did a track day with the following problems:

Engine won't rev over 5500rpm.

Radiator gets way to hot, at one point the water temp hit 115 degrees so I had to take it off the track to cool down.

Before fixing the revs problem, we need to address the cooling. In what order should I diagnose this problem so that it is most cost effective.

I was thinking something like:

1) flush radiator

2) check water pump functions properly

3) replace radiator

Should I remove the thermostat? Is getting some anti boil radiator additive worth it?

All suggestions welcome as I'm new to working on cars.

Can post photos if needed regarding the engine.

Link to comment
https://www.sau.com.au/forums/topic/432017-r31-rb20det-drift-car-help/
Share on other sites

1. double check all your heater hoses that come off the block and off the thermostat housing, very common to have a pin hole and it only pisses out when hot and sucks air in making the car run hotter

2. hose rad out with water to confirm its not restricted from a blockage

3.remove and check thermostat that it opens in boiling water

4.check that water pump rotors ( behind the thermostat) move when you spin it by hand with the fan belt off

5.might as well flush rad due to age

6. bleed coolant repetitively

for thermo fans the best type is the 'S' bladed fans as they pick up the air in a proper whirl wind where as the straight ones just are crap

Edited by Dan_J

Unfortunately i live in one of those neighbourhoods where the retiree's living next door call the police if we even sneeze. And my car has no exhaust so its pretty loud. I'll have to wait till Friday :(

Any ideas on why it wont rev past that amount? It seems to spit and run rough over the 5000 mark, loses boost too.

It's definitely running rich.. I can smell the fuel from the cabin. And it has some sort of resistor plugged in to the injectors that makes the ecu think the engine is running cold so it pumps more fuel in or something :/

For the heating side of things, first check the thermostat. Then check the radiator for cool spots. Basically, get the car warm and then run your hand over the radiator. If you feel spots that are cooler than other areas then the radiator is blocked and either needs replacing or the be professionally cleaned. Flushing the radiator does bugger all.

It's definitely running rich.. I can smell the fuel from the cabin. And it has some sort of resistor plugged in to the injectors that makes the ecu think the engine is running cold so it pumps more fuel in or something :/

i had the low fuel rail preasure issue which is why i brought it up.

i could also smell fuel in the cabin which was the fuel return line or something not working right. this may be an issue if you can smell fuel.

coilpacks, fresh spark plugs, dyno for a propper check to see whats going on i recon.

  • Like 1

It does this cold spot thing. So maybe I will give that a go. Do you thnk I should give it a go myself or just take it to a radiator place?

Take it to a radiator place, it isn't something that can be done at home. The cost of getting professionally cleaned may be close to that of a new radiator though, so it might be worth ringing and asking how much it will cost first.

I've been quoted $280 delivered for a brand new aus spec r31 radiator. Is that a reasonable price?

Ill take it all apart tomorrow and take it in first thing Monday morning. Apparently they have a method of testing if its blocked or functioning fine at the shop.

That's a pretty good price for a new genuine radiator mate, make sure you check the fan/shroud etc for damage.

After 25 years or however old the rad is, chances are it's going to be a bit rough. I'd recommend a new rad if you're hitting the track, for sure. Also hoses, thermostat etc. As bad as it is, I never used a thermostat in my R31 for the track (RB30).

I've been quoted $280 delivered for a brand new aus spec r31 radiator. Is that a reasonable price?

Ill take it all apart tomorrow and take it in first thing Monday morning. Apparently they have a method of testing if its blocked or functioning fine at the shop.

From what I gather, often they just tip some water out of a kettle through the radiator and feel for cold spots (pretty much the same method I suggested)
  • Like 1

So I took it in to the radiator shop. The guy said he has never seen a radiator that was so blocked in the 14 years of working there. Which is definitely a main factor in the overheating problem I've been having.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...