Jump to content
SAU Community

Recommended Posts

Here is a video of the knock from underneath the oil pan. https://www.facebook.com/photo.php?v=10202158035533359&l=7946916124426248770 I shut the car down once the knock was over. After those first few it stops. Going to start tearing into it tomorrow. plans are to go over the timing belt/ tensioners. cut open oil filter see how that looks, and drop the oil pan have a look in there.

=x Full tear down is necessary you would assume from that mild knock? It only does it on full cold starts. Im going to drop the pan and check the crank for out of round, but only being able to get 2 points checked isnt proper ><

What oil filter are you using? If the anti drainback valve is leaking overnight it can take a few seconds to pump the oil up. Mine was doing a similar thing with a certain brand filter. I changed to K+N and never looked back.

Is it fine at all other times and just does this at startup? No other noises?

=x Full tear down is necessary you would assume from that mild knock? It only does it on full cold starts. Im going to drop the pan and check the crank for out of round, but only being able to get 2 points checked isnt proper ><

That seems pointless.

^ yeah I don't know what I was saying :domokun: well the motor is out of the car now, should be on a stand tomorrow. It was not the oil filter drain back valve, i tested it did not leak a drop :( Guilt-Toy seems to be correct. I'll know in a day or two. Pictures to come. And picking up a s2 long block tomorrow. Any chances I will be able to get it to work with my NEO ECU/Harness?

You pulled the engine already? I would have cut open the oil filter and dropped the sump to see if there was bearing particles first.

Keep us posted, I think the cas is different between the two engines, and a few other small differences.

Yeah the motor was in a 240sx super easy to pull. I was in need of a new timing belt and water pump a few seals and pulleys. No signs of bearing in the oil filter, my last oil sample came back pretty regular but there's no telling until I tear it down. Any tips for When I pull the head to keep any stray coolant from getting down the cyl. Don't want a bunch of glycol getting down there if everything ends up looking healthy and it was just a bad tensioner pulley or oil pump

I asked because #6 can be leaned out by a bad plenum. Even without that possibility, #6 often suffers before the other cylinders because it runs hottest. I suppose you could/should go looking for things like bad injectors/plugs and possibly even oil squirters for other reasons why it might have pinged itself to death.

I'm assuming I should go ahead and port out this oil drain? if I do this and put in the restrictors should I still pop out that rear welch plug and install a drain right to the sump. (drift car) I would like to not need to install a drain.

post-113457-0-21893400-1381029707_thumb.jpg

External vents are almost essential. If you don't provide them then ALL the air flow from the bottom of the engine up to the top has to pass up through the drains, against the flow of oil. The extra up velocity makes it hard to get the oil to go down. Add in some extra flow area, velocity goes down, drainage works better.

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...