Jump to content
SAU Community

Recommended Posts

Up for sale is the HKS GT2835 KAI Kit I have been running on my car for the last few years. Kit was fitted around 2010 from memory and only problem I have ever had is it not living up to the performance of the Pro S that came before it

This is still a great streetable turbo if you want something with minimal lag and decent performance. I was getting 18psi at just over 3000rpm and I have 3' intercooler piping which probably added a little lag. Made a pretty safe 255rwkw on my car.

Included in the Kit is:

- HKS GT2835 KAI Turbo (0.84 rear housing, Surge slotted front cover + non surge slotted cover I had made up)

- Alloy intake pipe with ports for BOV and cam breater (Hoses for these in pic are not included)

- Braided Coolant and oil feed lines with fittings + Banjo's etc

- Direct bolt on to your Nissan style dump pipe

- Hose clamps + HKS silicon joiners for intake pipe and turbo compressor outlet pipe

- Can include Z32 AFM and new K&N Pod filter (old one pictured)

- Adjustable wastegate actuator

Turbo has minimal shaft play and I have never had a problem with it. Still in good condition. Only reason I'm getting rid of it is because I have built a new engine and have gone bigger turbo and external gate.

PM Me if you have any questions.

Starting price is $1800 but I'm open to offers, as long as they arent to low

Located in Mackay, Queensland

These kits sell for nearly $4000 brand new and this kit is still in great condition. All braided lines were P-clamped and wrapped so have not rubbed or been damaged in any way. Car serviced every 5000km with Motul 8100 X-Cess synthetic oil, and Proper coolant has always been run in the car.

20131012_122848_zpsc00637c2.jpg

20131012_122912_zps38a1e40b.jpg

20131012_122912_zps38a1e40b.jpg

20131012_123015_zps64b807c0.jpg

20131012_123058_zps2d052382.jpg

Edited by 89CAL
Link to comment
https://www.sau.com.au/forums/topic/433582-hks-gt2835-kai-turbo-kit-for-ecr33/
Share on other sites

  • 2 months later...
  • 2 months later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
    • The real question is, on some of those wild roads they call highways, how many times did a farmer in an old ute from the early 2000s blaze past you over double lines?   Tassie is a wild and really cool place, and after doing a work related road trip there January of 24, I understand why Targa Tasmania is ran there, and is so tough to do well at! We had a brand new Camry Hybrid that handled quite nicely, and thankfully weren't in an old car, because cresting some of those hills in a 100kmh zone for it to suddenly be like "surprise f**kers, this is a recommended 30kmh hard right turn" wouldn't be pretty. We weren't racing the Camry around, but we weren't slouching in the bends either. But my lord those old farmers know their old clapped out utes, and those roads, as they were absolutely hammering it!   You're also super lucky to make it up to Mt Wellingtong this time of year. It's often road closed with snow/ice! Also, I hope you hit up Salamander Road in Hobart for some insanely good food (I highly recommend the dimly lit Irish pub for a Guiness Pie, or even the bangers and mash!!!)   How long did the Ferry take to get across? I want to do a road trip of Tas on my own time, but I get horrifically sea sick, and I don't want me on the Ferry, just the car 😛
    • So far so good, about 30km on it so far and nothing out of sorts yet thankfully
    • Look at @Kinkstaah's thread on the issue.
×
×
  • Create New...