Jump to content
SAU Community

Recommended Posts

I've had a search around in the forum and on google and can't seem to find a great deal.

I've got a 32 GTR with a twin Kakimoto system on. I hate the twin cannon rears and it's a touch on the loud side. So I'm going to change the twin 70mm to a single 100mm before the rear muffler and fit a single oval 100mm muffler.

Basically I've spoke to a few muffler shops who said they couldn't get hold of a stainless one. I've done some searching myself and spoke to Xforce, they do one, but I can get a Borla or a Magnaflow for similar money from the states.

I'm a Pom and haven't heard of Xforce as we don't really get then over there. I'm just making sure they're not cheap crap because if they are I'll go for the magnaflow/Borla option

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/
Share on other sites

I changed my 4 inch catback to a 3 inch catback with an x force mid and rear muffler. 4 inch was overkill and the sound was ridiculous.

I also have a 3inch turbo to cat. (HKS off the shelf whatever)

The muffler shop said it would be much more restrictive however I made the exact same power. I was expecting to lose some boost in the top end and maybe some response, but nah its the same shit.

so +1 for xforce from me

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7072232
Share on other sites

There is very little difference in any of the straight through muffler designs from my experience. It's just a perforated pipe with packing at the end of the day. Go as large as you can with the muffler body to reduce decibels, and don't go larger than you need to in pipe size.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7073127
Share on other sites

I was running a 3 1/2inch system with a 3inch Xforce oval muffler, before that I had a 4inch nurspec ( bloody noisy), fujitsubo( quiet but 2inch restrictor) and I found the Xforce muffler great for flow and noise was perfect.

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7073586
Share on other sites

I bought second hand, and got a mild steal 3" bell-mouth dump for $60 and a stainless 3" cat-back with a large oval mid, and at the diif it ups to 3-1/2" with a short cannon for $200.

Then I bought a new catco 3" flanged cat for $175 off KMS

= brilliant quiet system for a grand sum or $435...

at least look at S/H options before you spend thousands

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7074292
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...