R32 Rear Subframe Bushes- Options And Reccomendations

[045HOW]

Hi guys, i have recently added a 32 to my collection and it has disintegrated rear

subframe bushes. So much so, big chunks of it fell out when i jacked one side from the subframe mount

Ive had a look around and see that there are solid,locking,pineapple,hardened rubber and poly options. And also the significance of offset for angle in regards to grip and such.
My question is, what are my viable options in regards to handling and grip without going solid alloy bushes? Im thinking Poly, but what is the best brand to go with? unless the hardened rubber is the best way to go. Is there anything else to consider? and if i decide to go with a full bush kit for the car, which company has better product for this model?

Cheers in advance guys

Apologies if i have missed a vital thread in regards to this information.

[GTSBoy]

I used the Whiteline hard rubber ones in mine and they are good. Previously had original + pineapples and the current set up is at least as good as that (I mean.....how do you go about quantifying how much tighter one is than another anyway!!?)

[NismoSTune]

I went with Whiteline all around (diff are solid bushes). The only issue I had with them is that the subframe sits very high now, so much that I think I need spacers made up (1-1.5") to drop it back down to stock as it affects my antisquat. Can't find any info as to it being normal or not.

[GTRPSI]

I used solid alloy bush inserts, not the press in ones, the ones that fit on top of your old worn rubber ones , the upper ones were a C section so you only had to loosen the subframe a little to slip them in.

Tightened up the rear a lot, only a little extra road noise through the cabin.

[045HOW]

Does anyone else have any input? Has this site gone a bit quiet?

[Dose Pipe Sutututu]

Just go pinapples for now, they sit in between the subframe and the beveled washer and nut. Installing it in standard fitment will reduce subframe movement.

Of course, best solution is to drop the subframe, drill out your dead bushes and press in New whiteline or superpro ones.

Slip in collar work better when you're bushing is semi shagged, if they're totalled like yours are then the collars have no where to sit and end up moving around causing some chatter.

[045HOW]

Cheers mate. Which is the better brand to choose? Are their bushes the same or is there some difference in performance and offset or whatever?

[Dan_J]

may as well put in alloy subframe bushes, cant really tell the difference in comfort

[Dose Pipe Sutututu]

Cheers mate. Which is the better brand to choose? Are their bushes the same or is there some difference in performance and offset or whatever?

stick to SuperPro OR Whiteline.. can't go wrong

Just get whatever is in the catalog

[nick81xd]

superpro or factory bush without exceptions

[045HOW]

Superpro dont do the actual bushes yet. they are hummin and harring about making them thus far. As far as it looks i will be going with whiteline bushes and maybe also pineapples. unless someone has some mental good bush kit that i can get from america or something.

[Dose Pipe Sutututu]

does this car get punished on the track or is it just a streeter?

[045HOW]

Streeter with future outlook for definitely more power ( has built 25) and possibly tracked. But yeah for now for maybe a year or so streeter. I just want the good stuff as I have the money to back it up.

[Dose Pipe Sutututu]

if that's the case just get full replacement whiteline subframe bushes, drop the entire subframe pop in the new bushes.. at the same time buy some GKTech subframe re-enforcement plates and get them welded on...

scrub up the sucker and re-spray it too.

[turboedsloth]

Have the whiteline replacements plus pineapples and they go good, have another car with the gktech push in bushes and they feel alright aswell

[Hank Scorpio]

I replace a LOT of bushes in R32 subframes and always use Whiteline items, they go in and work well.