Jump to content
SAU Community

S A U - N S W Summer 2013 Tech Night For Members 6Th Dec At C C S


Recommended Posts

Hi Guys,

This really bums me out but I can't make this tonight, we had some serious infrastructure failure today at work and I will be rebuilding some servers through out the night.

have fun, someone can hopefully take advantage of my spot.

Cheers,

Aron

Found out the wifes xmas party is at blacktown workers which is 30 seconds round the corner, if we finnish early enough i will ninja in with her. The party starts at 630. Or SAU can GATECRASH ;)

My girlfriend and i are out for tonight. The GTR was in an accident last night and has light damage on the RH front guard/bumper and a medium damage on the RH rear quarter panel smashing the tail light

My fault because of the debris on the road lastnight with the weather. So angry, should be fixed by next meet i hope :(

My girlfriend and i are out for tonight. The GTR was in an accident last night and has light damage on the RH front guard/bumper and a medium damage on the RH rear quarter panel smashing the tail light

My fault because of the debris on the road lastnight with the weather. So angry, should be fixed by next meet i hope :(

Shit sorry to hear mate, hope everyone is ok

  • Like 1

Won't be bringing any merchandise tonight unfortunately (not that I have any stickers, anyway), as my car isn't running the best and I'm catching a lift in.

Good stuff by Daniel and the Team at Carbon..

Ill be in for some window tinting and possibly a headunit for the fagna mid december. That is if your still open that close to xmas?

Great night again guys! Well done CCS and the Execs.

I'll wait for the wrap up thread :)

Thanks Alex, David and Joey...

The Wrap-Up is now in the General NSW Section...

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
    • Finally back on the ground and once around the block for the first time in 2+ years
    • Ok a solution was found. I had left the factory oil temp sensor in and it was hooked up. My car never had the triple gauges.  Apparently when you delete the factory pressure and leave the temp sensor connected it triggers the oil light on the dashboard. Disconnected the temp sender, no more light.  I still haven't gotten around to look at the diagrams to figure out how/why they are tied together.
×
×
  • Create New...