Jump to content
SAU Community

Recommended Posts

Hey guys so just got the car tuned its making 450hp at the wheels only running an exedy heavy duty witch is starting to slip so in need or a new one my budged is around $700-1000

What would the best clutch for my application be that will get reasanilbe amount of time & use out of it? Street car with abit of track/drift on the weekends

Thanx

for your budget your likely going back to Exedy

TBH for that price you'll be getting a better clutch from NPC..

I've got a 10" modified Patrol Exedy pressure plate with their infamous carbotic plate for under ~$800 delivered... Doug from NPC said it will take up to 400kW any day of the week.

best part is, the pedal feels as soft as a stock clutch... I even thought I fked the clutch install when I when to test my pedal.

Ok awesome! What I don't get is why the carbotic is over $200 dollars difference if its a lot better then the Kevlar button?

These are the prices I got:

10" cushioned button :- $907.5

10" Kevlar button :- $973.50

10" carbotic button:- $753.5

maybe the material costs?

I've never used a kevlar clutch before so I can't comment.. but a ceramic vs. carbotic I must say the ceramic is easier to drive :)

It takes a man to drive a carbotic clutch, I'm pretty used to mine and can go through Sydney traffic without stalling it (when I'm alert, when I'm tired after work it's stall-o-matic)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...