Jump to content
SAU Community

Recommended Posts

Hi, Gentlemen

Change direction from 600 hp to 1 hp ( horse racing) walk in walk out sale

184 sq m fully equiped workshop warehouse with kitchen, shower, toilets,backyard,office and upstair room and storage,new 5 ton clear floor hoist, Mic,Tig Ark welder, transmission hoist,3 phase compressor,roll cab tools etc.

10 car spacse in front,6 meter ceiling. rent 13500 pa + out goings

GTR33 track car

Trust FPR front bar and bonnet

400R geniune rear bar

body stripped and seam welded,painted

full welded in roll cage

aero mirrors

32 row oil cooler

ARC 100mm intercooler

Nismo front tower brace with brake stopper

Accu sump

electric fan

50mm alloy radiator and header tank

Haltech Platinum Pro with IQ3 logger GPS lap time dash

OS Giken 5 sp close ratio gear box

Nismo twin super copper mix clutch

1.5 way rear diff

Twin 044, external fuel pump + lift pump ,5 litre surge tank for E85, twin entry fuel rail,1500 cc injectors

Race pace steam pipe exhaust manifold,

4" s/s front pipe external gate plumb back

Magnaflow 4" in/out mid muffler ( below 75 db noice level)

Amuse 3.75" titanium cat back exhaust

Full forged blue print engine, Wesico +20 pistons Eagle rods, Arp bolts,head bolts,stock new head, exhaust port matched, 9 litre sump with baffles etc etc

GT3540 single turbo .82 rear housing,50mm Tial waste gate

Twin Bride seats with rails, Takada green hardness

TE37 18x10.5+15 yokohama 050, + 6 of Rays Challenge 18x10+20 Toyo R1R,+ Impulse 18x10+20 twin valves Dunlop full slicks

B-Max ( Harrop) 6pots 375mm rotors front and 4 pots rear brakes, after market master brake cylinder

Bilstien coilovers

Full front and rear K-frame and suspension upgrades

Front carbon canards

Front carbon undertray and rear defuser

Carbon boot lid with lip and super light weight dry carbon rear wing

Spent appro 100k on this 400kwaw beast


S15 track car

C-West front bar with carbon defuser and canards

C-West +50 mm wide front guards

C-West side skirts

C-West rear wing

Bolt on 6 point Japanese roll cage

Origin carbon bonnet + spare one

GTR33 front Brembo, Project M pro 330mm rotor,and head,Club racer pads front and rear

GTST 5 sp gear box conversion

rear 1.5 way diff

Oil cooler

3.5" titanium cat back exhaust

Full forged engine , JE +20 pistons, Eagle rod ARP bolts, Darton sleeves, fully reworked head,Supertech springs,BC 256 cams not assemble yet.

Ogura twin plate clutch

HKS 3037 top mount turbo, external gate, 300+kwaw on E85

044 external pump and 5 litre surge tank

1000 cc injectors

Haltech platinum pro eco

large intercooler

50mm alloy radiator

BM 50 GTR master brake cylinder

Nismo LMGT4 17x9.5 +12 and Black Racing 17x9.5+22 with Kumho S70 semis

Tien coilovers

All adjustable aftermarket suspension arms

Etc.Etc

Spent 65k on this fun track car


95GTR33 HKSGTR Fully forged engine,272cams sliding cam gears, Arias +20 pistons Nismo 1000hp rods, GTR34 N1 NUR crank,HKS fuel rail,HKS 2530 Turbos, GTR34 s/s dumps.Front pipe, HKS exhaust, intercooler, hypermax coilovers, 320km speedo,OS triple plate clutch, 044 external fuel pump,surge tank,50mm alloy radiator,

Apexi power FC 320kw and huge 765 nm torgue


95 GTR33 with Yokohama Racing Gallery built engine 303kw 272 cams, injectors,N1 turbos,Mine's ecu tune.Genuine 400R front bar and serial 3 lower lip,oil cooler, Nismo 320km speedo,etc.etc.


Super low race car trailer with Tyre rack and brake

95 Toyota Hiace 4x4 turbo diesel low 80km tow van with all luxury features

93 Lexus LS400 v8 sedan

Honda Shadow 200cc motor bike

Hiace turbo diesel van, excellent mechanical, to be part out, front hit


plus 20k of new and used parts, new ATS triple carbon push type clutch, spare pair HKS 2530 turbos dyno time only RB 26 engine with N1 turbos and split dumps.etc.etc


On books there is around 280k of goods and equipment. walk in walk out 150k ???

other option is to get a competent mechanic to run the whole workshop with zero ingoings and terms and conditions to suit both

Alex 0433878905 Braeside 3195


post-50742-0-06098500-1383926909_thumb.jpg

post-50742-0-13422200-1383927009_thumb.jpg

post-50742-0-97315900-1383927127_thumb.png

post-50742-0-18232300-1383927184_thumb.jpg

post-50742-0-37941200-1383927229_thumb.jpg

Hi, Sycorb, wish I am in NSW, took the S15 to drivebathurst and Eastern Creek for a double header, Had a great time, Phillip Island is very good, Bathurst is awesome, I will do it again.There is a Sydney tuner ( EX Melbourne) very interested but he can't break the gentlemen agreement of not setting up shop in Melb as competition to his mentor.

By the way, I will hand over all my Japanese connections, auction accounts and deposit to the new operator

cheers

happy motoring

It is open for negotiation.there are many ways to make it a win win situation for all involved. You are in Melbourne so you can call me to arrange a time for a meeting and inspect the site, cars and equipment. Thanks for looking anyway,

Alex.

0433878905

Braeside 3195

Hi, Strick, got offer of 4k for this super low race car trailer. not sold yet , prefer to keep it for the 2 track cars.

walk in walk out price is negotiable

Chris, good to hear from you, you could be the one I am looking for. text you back to go further. all option are open at this stage.

Alex 0433878905

Braeside 3195,

  • Like 1

I will come back in a different format. Got to get some more money to do it.

Thanks Chris for your opinion and support.

cheers

Alex

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...