Jump to content
SAU Community

Recommended Posts

Have had them for 8 months daily driver. Making 180rwkw

255s on xxr18s. Good in wet good in dry. Minimal road noise. Excellent value for preformance. Please note these tyres feel like a much softer compound than what im used to does wear quite quickish. I don't do launches or punch it hard but I do a few kms in year. So yeah.

Not a tyre expert. Quite happy with them on the road. Esp with this heavy duty clutch in the rain :|

Edited by Therealsandybang
  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Any update on the momo tyres?

How many k's you've done on them?

Has the rubber changed? Hardened?

going by my first post, it's been over a year now with these up front. they have not hardened or developed any inconsistency.

not sure of kms. i'll guess at 8-10k.

still grippy. suprisingly not much wear, and wearing evenly.

i'm really pleased with the tyres. i highly recommend them.

i will be getting these again. there is nothing close in this price range, and probably nothing for double the price too.

Only st george tyres in rockdale sell the momos as its their brand with momo together... price is the same... ask for Sam and just tell him Daniel with the white r34 sent you and he'll fix you up a tad, good family friends...

  • 4 months later...

Hi, I realize it's an old thread but.......I bought a full set of these shoes for my little rvr 18 months ago from a place in Brookvale. I've now travelled 30,000 with them, and have given them hell. I have a problem with my right foot, which triggers a problem with my left foot, but it only happens in cars. For the money, these are super sticky.

I'm about to go and get another set as I'm now 1mm from the wear indicators. They did go off a little bit after about 7000km's or so on the front, but I rotated them at 10000 km's.

I have found them faultless in wet / dry / hard braking / cornering. I even started trying to REALLY push and find where they would let go after the first 500 km's, simply because they gave me so much confidence, again no luck until I'd worn a fair bit of tread off them.

I run mine around 38-40 psi with 205/50 r17's, but man they have made my bus stick through any corner I've thrown at it.

I've had expensive tyres on many cars over the years, although this is my first awd car. I actually bought it as a bit of a laugh for taking dogs to the beach and back, but then once I got to know it with the momo outrun m3's, I just love to take it out and give the rex's etc a shock whenever possible.

Go the Momo's, you won't be disappointed. :yes:

  • 1 month later...

+1 here as well

Had these Tyres on my GTR for the last 6 months.

Grip good dry and wet, no complaints.

I would easily recommend them to anyone reading this because you will not get better money for value. 100%

  • 11 months later...

I drive on them daily on my wagon, they are a bit noisy (expected from a $75-80 tyre). I'll be spending a bit more next time on quiet.

Tread life is great though, mine look almost new and it's been a bit over a year since I got them. Grip is decent, although since my tyres are oversized, they roll a bit more and the front end looses grip under acceleration while turning (e.g. turning onto a motorway on-ramp, Subaru Liberty turbo).

I drive on them daily on my wagon, they are a bit noisy (expected from a $75-80 tyre). I'll be spending a bit more next time.

Tread life is great though, mine look almost new and it's been a bit over a year since I got them.



Where do you get them for that price? What size?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...