Jump to content
SAU Community

Recommended Posts

Sold the car and I've got this stuff I need to move on so its going on here. The OEM parts are from 1993 R32 GTR with 120,000km

1. S15 Silvia/200SX pair Rear RDA slotted rotors with metal backing plates (thickness unsure) FREE

2. 4x S15 Silvia/200SX Rear brake calipers 3 of them are leaking and have been disassembled 1 of them still operating fine. Have 3 used Nissan brake pads to go with them and also have handbrake cables attached $20 the whole lot. Picture is of the 1 remaining caliper that operates fine.

DSC_3972.jpg

3. Endless MX72 rear brake pads for all Silvias S13/S14/S15 brand new in box $250

4. R32 GTR HICAS pump. HICAS was working fine when it was removed form the car. $10

DSC_3967.jpg

5. R32 GTR RB26DETT OEM Fuel injectors x6 were leaking fuel due to perished O-rings. New O-rings and a professional clean and test and should be good to go. $100
DSC_3969.jpg

6. R32 GTR OEM Fuel pump. Little bit of corrosion on the surface. Worked fine when removed from car. $10

DSC_3978.jpg

7. R32 GTR RB26DETT OEM Ceramic exhaust wheel pair of turbochargers . Worked fine when removed from car. No shaft play and very smooth. $100

DSC_3955.jpgDSC_3956.jpg

8. 350mm Deep dish suede steering wheels x2. Came with my HKB boss kit that I purchased. One steering wheel has horn button other one doesn't have horn button. These steering wheels will bolt up to the same pattern as Nardi wheels. I bought a Nardi wheel to use with the boss kit so no use for these wheels. $10 if you want the horn button. $5 without horn button.

9. Old school Tomei remapped ECU for R32 GTR RB26DETT. Suitable for cars running standard injectors and AFMs. Worked fine when removed from car. Everything runs just like OEM except engine revs out smoother. Cheap and tidy way to remove 180km/h speed cut from your R32 GTR $80

DSC_3973.jpg

10. HKS Hipermax IV GT Coilovers. Bought brand new from Japan via Jesse Streeter earlier this year only used for about 4 months and 4000km before car got sold. Complete set including cable ties, C-spanners, certificates and instructions. 7kg Front & Rear spring rates. Excellent balance of handling and ride comfort for road use. Guaranteed working 100% genuine Japanese quality. $1200

DSC_3957.jpg

11. Professionally welded up R32 GTR Rear HICAS steering rack. Cheap and effective way to lock out HICAS without resorting to buying a dodgy HICAS lock bar. $50

DSC_3966.jpg

12. Nismo R32 GTR steering rack bush/mount kit. Brand new in bag never installed $50

DSC_3968.jpg

13. R32 GTR RB26DETT OEM air box including air filter. $150

DSC_3974.jpg

14. Brand new Genuine Nissan Oil filter 15208-H890C suits R32 GTR RB26DETT and anything else that accepts the same filter. $15

DSC_3975.jpgDSC_3976.jpg

15. Ryco Z387 fuel filter to suit R32 GTR RB26DETT. Used for about 1500kms. FREE

DSC_3977.jpg

16. R32 GTR RB26DETT OEM Radiator. No leaks. Doesn't come with radiator cap. $70

DSC_3979.jpgDSC_3980.jpg

17. Nismo high pressure radiator cap. Bought brand new and used for about 4 months. $25

18. Apexi RSM Blue version. Unwanted extra given with other purchase. Was assured that it works from previous owner. $50

19. Genuine made in Germany BBS RS RS261. 17x9 +20 offset with centre bores made to 66.1mm to suit Nissan hubs so no hub rings required. Includes centre caps. Contisport3 tyres 225/45/17. 2 completely bald and 2 with minimal tread left. Light gutter rash on some of the wheels. Not sure what these are worth since they are quite rare. $1800 or reasonable offer

DSC_3959.jpg

20. Intima SR low dust rear brake pads to suit Silvias S13/14/15. Used for about 3 months estimate 85% meat left. $50

Contact via PM.

Pickup in Sydney Metro area.

Free items are pickup only.

May post at buyer's expense.

Advertise them GT-R Injectors on calaisturbo.com.au, they'll sell for $300 easy. Cheap upgrade for all the boys going Nistune and running 220rwkw.

  • Like 1

NISMO RAD CAP SOLD

TOMEI OLD SCHOOL ECU SOLD

Photos of the steering wheels added:

350mm Deep dish suede steering wheels x2. Came with my HKB boss kit that I purchased.SORRY NO HORN BUTTONS can't find it. These steering wheels will bolt up to the same pattern as Nardi wheels. I bought a Nardi wheel to use with the boss kit so no use for these wheels. $5 each or free if you buy something else and pickup.

2vt4dc5.jpg

Found some more stuff to sell:

Cusco Rear upper camber arms to suit R32 GTR ONLY. Bought new in May this year, used for about 4 months. Great condition $250
1zplef5.jpg

Cusco Rear traction arms to suit most Skylines and Silvias. Bought new in May this year, used for about 4 months. Great condition $250
1113vcy.jpg

Edited by chris86
  • 2 weeks later...
  • 1 month later...
  • 1 month later...

Update to what's still left for sale. Everything else is gone.

R32 RB26DETT GTR Fuel pump (worked fine swapped out for high flow pump) - FREE or goes in the bin

R32 RB26DETT GTR factory fuel injectors (replaced because leaking) - $80

Cusco rear upper camber arms to suit R32 GTR (almost like new) - $170

Cusco rear traction arms to suit most Nissans (almost like new) - $150

Endless MX72 rear brake pads for Silvias S13/S14/S15 (brand new) - $100

R32 RB26DETT GTR factory Radiator (wasn't leaking swap due to upgrade) - $20

S15 SR20DET factory Radiator (wasn't leaking swap due to upgrade) - $50

Nissan RB26DETT Oil filter (brand new) - $10 or FREE if you buy something else

R32 GTR RB26DETT factory turbochargers (worked fine swapped out for Garrett -7s) - $50 for the pair

R32 GTR welded up HICAS rear wheel steering rack (simpler way to delete HICAS) - FREE or goes in the bin

R32 GTR engine bay HICAS pump (no issues removed due to HICAS delete) - FREE or goes in the bin

S15 rear brake calipers (3 broken & 1 fine) - FREE or goes in the bin

Genuine Nardi Classic 360mm black leather steering wheel with genuine Nardi Horn button & HKB Boss kit to suit R32 GTR (like new) - $300

nardi.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...