Jump to content
SAU Community

Nsw Rms Light Vehicles Modification Guide Updated 8/11/2013


Recommended Posts

Can someone delete the spam post and sticky this thread? Is a great resource

I deleted the posts, hopefully the IPs get blocked soon too. It's not just the NSW section, either.

Also, topic "stickied" for easier reference.

What is this spam shit that is getting through the forums lately? Why SAU!! It is grinding my gears. Mods need to do something about the signing up / privledges to post.

Yeah, as above, I've deleted it. I'm only a Moderator, so that's as much as I can do. I have let the Admins know that the users and/or IP addresses need to be blocked.

In the mean time, I need to get me some Ugg boots! :P

  • Like 1

Theres some interesting 'very grey' areas there. I'd suggest to anyone with a vehicle modified within the criteria to keep a copy in their car, to show anyone inspecting the car on the roadside that certain items they think are defective are not (you probably won't win, it'll just make them more angry - especially if you have a rego inspectors ticket & they only have a badge).

Theres some interesting 'very grey' areas there. I'd suggest to anyone with a vehicle modified within the criteria to keep a copy in their car, to show anyone inspecting the car on the roadside that certain items they think are defective are not (you probably won't win, it'll just make them more angry - especially if you have a rego inspectors ticket & they only have a badge).

I think they've tried so hard to make it easy to read/understand that they've missed some critical detail.

eg; An engine that is not of an original family of engine for the series of models, or any engine more than 20% larger than the largest original optional engine for that series.

Does that mean I can replace my 1JZ with a 2JZ? (20% increase in capacity)
I'm pretty sure it doesn't but it kind of sounds like I can??
Example not requiring certification:
• Replacement of a 2.0 litre engine with an engine of 2.4 litres capacity or less and from the same vehicle series.

Interesting - that'd preclude swapping my 4G94 with a 4G69 then - two Lancer VRX from 2004, but one's a CH and the other CG, so no swapping I guess.

...Not that I'd spend money on doing that, though.

edit:: but it sounds like swapping it for a 2.0 4g93 is a-okay with certification? helloooooooo evo engine

I think they've tried so hard to make it easy to read/understand that they've missed some critical detail.

eg; An engine that is not of an original family of engine for the series of models, or any engine more than 20% larger than the largest original optional engine for that series.

Does that mean I can replace my 1JZ with a 2JZ? (20% increase in capacity)

I'm pretty sure it doesn't but it kind of sounds like I can??

Example not requiring certification:

• Replacement of a 2.0 litre engine with an engine of 2.4 litres capacity or less and from the same vehicle series.

So swapping and rb25det with an rb26det still requires a certificate?

The only one I'm going to have a problem with (since I got defected the other week for it) are aftermarket seats

I've got bride seats + rails in my 34

Would I have any problems getting them engineered?

Fitting of seats to non-original seat anchorages.
Example requiring certification:
Fitting seats using anchorages not originally supplied by the manufacturer.

The only one I'm going to have a problem with (since I got defected the other week for it) are aftermarket seats

I've got bride seats + rails in my 34

Would I have any problems getting them engineered?

Fitting of seats to non-original seat anchorages.
Example requiring certification:
Fitting seats using anchorages not originally supplied by the manufacturer.

seats dont meet ADR however no modifications to anchorages have been made so engineering will be a breeze! i had mind noted on my report aswell

seats dont meet ADR however no modifications to anchorages have been made so engineering will be a breeze! i had mind noted on my report aswell

Even though the rails are brides?

Who did you go through for the engineering cert?

Even though the rails are brides?

Who did you go through for the engineering cert?

ill have to check my cert when i get home. Arsed if i remember

yeah rails will be fine given they bolt all to the factory location using factory mounts etc

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...