Jump to content
SAU Community

Recommended Posts

I have a 96 s2 gtst that I bought from Victoria. Now I'm still driving it as it has rego till March or so, I'm wondering if I have to take it over Dickson as it's an interstate transfer. I hear from some ppl I don't and from others I do.

Can someone please confirm this for me.

Cheers cuong.

Link to comment
https://www.sau.com.au/forums/topic/435094-do-i-have-to-go-dickson/
Share on other sites

No one hath more knowledge on such matters than the one they call 'The Dickson Kid' (once had a little thread on the subject) .. Sometimes known to sneak around late at night R34 GTR spotting with his Mum and thinly disguised as Jeremy.

No one hath more knowledge on such matters than the one they call 'The Dickson Kid' (once had a little thread on the subject) .. Sometimes known to sneak around late at night R34 GTR spotting with his Mum and thinly disguised as Jeremy.

Bahahaha! Love it. :ninja:

Yes you do.

1. Import

2 interstate

I've exhausted all option on trying not to go through Dickson but no one else will touch the car.

interstate yes import exclusively no. depends on complance plate colour. however as i too have a 96 s2 and assume your compliance plate is magenta coloured, then yes you do not have a choice.

interstate yes import exclusively no. depends on complance plate colour. however as i too have a 96 s2 and assume your compliance plate is magenta coloured, then yes you do not have a choice.

I was told - import = dickson. I know there is some plate (ozdaz?)had some colour plate which he could go somewhere else. But, both my cars must of had the magenta colour. Green or purple. Green goes to Dickson - purple does not (I believe). I don't understand the compliance plates though. I think certain states have heavier compliance then other states.

Bill, you want to go R34 GTR spotting together? Have only seen 2 ! :(

Laws are super confusing; other way around magenta has to go to dickson, green or blue low volume or personal import does not. Talk to the right mechanic face to face and if you have a blue or green plate it is possible to get through with a local mechanic. I know a bloke who works at the dickson motor registry and was how we got my mates 180 passed at a local mechanic. All local mechanics have been advised to send all imports to dickson IF POSSIBLE but can OCCASIONALLY pass green or blue complianced imports.

It is a bullshit pollicy to justify dicksons existence. I dont personally work as a mechanic nor at the registry just what i have been told.

Laws are super confusing; other way around magenta has to go to dickson, green or blue low volume or personal import does not. Talk to the right mechanic face to face and if you have a blue or green plate it is possible to get through with a local mechanic. I know a bloke who works at the dickson motor registry and was how we got my mates 180 passed at a local mechanic. All local mechanics have been advised to send all imports to dickson IF POSSIBLE but can OCCASIONALLY pass green or blue complianced imports.

It is a bullshit pollicy to justify dicksons existence. I dont personally work as a mechanic nor at the registry just what i have been told.

Oopsie - plates wrong way around lol But yeah - Follow this^ and you'll be fine.

There is a huge crackdown going on as Anfanee said so you can try your luck with a local. I knew Rosie had minimal work needed to get done to pass so I just took the risk at Dickson - I got a mechanic to do the work and show them the receipt. It's a lot better to prove a shop has done it correctly then bolt ons.

Goodluck ! I know a bit about the hassles Dickson can give - however, I just went in for a shopping list - fixed the list and passed.

You will need to get an ID check anyway. I have the same thing going on right now, I have a "relaxed" roadworthy lined up and found I had to go in for an ID check anyway, so I didn't want to be that guy that makes some dude lose his stamp.

Don't be that guy.

Better off to just make it as good as possible, do all the little dumb stuff like child seat restraints, make sure any pod filters/rad overflows/everything else is bolted in. If you have a front mount, make sure the reo for the front bar hasn't been cut. Check that your tyre placards are in English and you have the correct rolling diameter and load rating. I'm fairly certain the battle over coilovers that everyone has been having is fine now, so it means that you can still have them. If you have any questions call the technical advisers at Dickson, they are pretty good, and not as kunty as everyone else. I can't find the number, but call 13 22 81, and ask to speak to a technical adviser.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...