Jump to content
SAU Community

Recommended Posts

I have a 96 s2 gtst that I bought from Victoria. Now I'm still driving it as it has rego till March or so, I'm wondering if I have to take it over Dickson as it's an interstate transfer. I hear from some ppl I don't and from others I do.

Can someone please confirm this for me.

Cheers cuong.

Link to comment
https://www.sau.com.au/forums/topic/435094-do-i-have-to-go-dickson/
Share on other sites

No one hath more knowledge on such matters than the one they call 'The Dickson Kid' (once had a little thread on the subject) .. Sometimes known to sneak around late at night R34 GTR spotting with his Mum and thinly disguised as Jeremy.

No one hath more knowledge on such matters than the one they call 'The Dickson Kid' (once had a little thread on the subject) .. Sometimes known to sneak around late at night R34 GTR spotting with his Mum and thinly disguised as Jeremy.

Bahahaha! Love it. :ninja:

Yes you do.

1. Import

2 interstate

I've exhausted all option on trying not to go through Dickson but no one else will touch the car.

interstate yes import exclusively no. depends on complance plate colour. however as i too have a 96 s2 and assume your compliance plate is magenta coloured, then yes you do not have a choice.

interstate yes import exclusively no. depends on complance plate colour. however as i too have a 96 s2 and assume your compliance plate is magenta coloured, then yes you do not have a choice.

I was told - import = dickson. I know there is some plate (ozdaz?)had some colour plate which he could go somewhere else. But, both my cars must of had the magenta colour. Green or purple. Green goes to Dickson - purple does not (I believe). I don't understand the compliance plates though. I think certain states have heavier compliance then other states.

Bill, you want to go R34 GTR spotting together? Have only seen 2 ! :(

Laws are super confusing; other way around magenta has to go to dickson, green or blue low volume or personal import does not. Talk to the right mechanic face to face and if you have a blue or green plate it is possible to get through with a local mechanic. I know a bloke who works at the dickson motor registry and was how we got my mates 180 passed at a local mechanic. All local mechanics have been advised to send all imports to dickson IF POSSIBLE but can OCCASIONALLY pass green or blue complianced imports.

It is a bullshit pollicy to justify dicksons existence. I dont personally work as a mechanic nor at the registry just what i have been told.

Laws are super confusing; other way around magenta has to go to dickson, green or blue low volume or personal import does not. Talk to the right mechanic face to face and if you have a blue or green plate it is possible to get through with a local mechanic. I know a bloke who works at the dickson motor registry and was how we got my mates 180 passed at a local mechanic. All local mechanics have been advised to send all imports to dickson IF POSSIBLE but can OCCASIONALLY pass green or blue complianced imports.

It is a bullshit pollicy to justify dicksons existence. I dont personally work as a mechanic nor at the registry just what i have been told.

Oopsie - plates wrong way around lol But yeah - Follow this^ and you'll be fine.

There is a huge crackdown going on as Anfanee said so you can try your luck with a local. I knew Rosie had minimal work needed to get done to pass so I just took the risk at Dickson - I got a mechanic to do the work and show them the receipt. It's a lot better to prove a shop has done it correctly then bolt ons.

Goodluck ! I know a bit about the hassles Dickson can give - however, I just went in for a shopping list - fixed the list and passed.

You will need to get an ID check anyway. I have the same thing going on right now, I have a "relaxed" roadworthy lined up and found I had to go in for an ID check anyway, so I didn't want to be that guy that makes some dude lose his stamp.

Don't be that guy.

Better off to just make it as good as possible, do all the little dumb stuff like child seat restraints, make sure any pod filters/rad overflows/everything else is bolted in. If you have a front mount, make sure the reo for the front bar hasn't been cut. Check that your tyre placards are in English and you have the correct rolling diameter and load rating. I'm fairly certain the battle over coilovers that everyone has been having is fine now, so it means that you can still have them. If you have any questions call the technical advisers at Dickson, they are pretty good, and not as kunty as everyone else. I can't find the number, but call 13 22 81, and ask to speak to a technical adviser.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...