Jump to content
SAU Community

Recommended Posts

I have a 96 s2 gtst that I bought from Victoria. Now I'm still driving it as it has rego till March or so, I'm wondering if I have to take it over Dickson as it's an interstate transfer. I hear from some ppl I don't and from others I do.

Can someone please confirm this for me.

Cheers cuong.

Link to comment
https://www.sau.com.au/forums/topic/435094-do-i-have-to-go-dickson/
Share on other sites

No one hath more knowledge on such matters than the one they call 'The Dickson Kid' (once had a little thread on the subject) .. Sometimes known to sneak around late at night R34 GTR spotting with his Mum and thinly disguised as Jeremy.

No one hath more knowledge on such matters than the one they call 'The Dickson Kid' (once had a little thread on the subject) .. Sometimes known to sneak around late at night R34 GTR spotting with his Mum and thinly disguised as Jeremy.

Bahahaha! Love it. :ninja:

Yes you do.

1. Import

2 interstate

I've exhausted all option on trying not to go through Dickson but no one else will touch the car.

interstate yes import exclusively no. depends on complance plate colour. however as i too have a 96 s2 and assume your compliance plate is magenta coloured, then yes you do not have a choice.

interstate yes import exclusively no. depends on complance plate colour. however as i too have a 96 s2 and assume your compliance plate is magenta coloured, then yes you do not have a choice.

I was told - import = dickson. I know there is some plate (ozdaz?)had some colour plate which he could go somewhere else. But, both my cars must of had the magenta colour. Green or purple. Green goes to Dickson - purple does not (I believe). I don't understand the compliance plates though. I think certain states have heavier compliance then other states.

Bill, you want to go R34 GTR spotting together? Have only seen 2 ! :(

Laws are super confusing; other way around magenta has to go to dickson, green or blue low volume or personal import does not. Talk to the right mechanic face to face and if you have a blue or green plate it is possible to get through with a local mechanic. I know a bloke who works at the dickson motor registry and was how we got my mates 180 passed at a local mechanic. All local mechanics have been advised to send all imports to dickson IF POSSIBLE but can OCCASIONALLY pass green or blue complianced imports.

It is a bullshit pollicy to justify dicksons existence. I dont personally work as a mechanic nor at the registry just what i have been told.

Laws are super confusing; other way around magenta has to go to dickson, green or blue low volume or personal import does not. Talk to the right mechanic face to face and if you have a blue or green plate it is possible to get through with a local mechanic. I know a bloke who works at the dickson motor registry and was how we got my mates 180 passed at a local mechanic. All local mechanics have been advised to send all imports to dickson IF POSSIBLE but can OCCASIONALLY pass green or blue complianced imports.

It is a bullshit pollicy to justify dicksons existence. I dont personally work as a mechanic nor at the registry just what i have been told.

Oopsie - plates wrong way around lol But yeah - Follow this^ and you'll be fine.

There is a huge crackdown going on as Anfanee said so you can try your luck with a local. I knew Rosie had minimal work needed to get done to pass so I just took the risk at Dickson - I got a mechanic to do the work and show them the receipt. It's a lot better to prove a shop has done it correctly then bolt ons.

Goodluck ! I know a bit about the hassles Dickson can give - however, I just went in for a shopping list - fixed the list and passed.

You will need to get an ID check anyway. I have the same thing going on right now, I have a "relaxed" roadworthy lined up and found I had to go in for an ID check anyway, so I didn't want to be that guy that makes some dude lose his stamp.

Don't be that guy.

Better off to just make it as good as possible, do all the little dumb stuff like child seat restraints, make sure any pod filters/rad overflows/everything else is bolted in. If you have a front mount, make sure the reo for the front bar hasn't been cut. Check that your tyre placards are in English and you have the correct rolling diameter and load rating. I'm fairly certain the battle over coilovers that everyone has been having is fine now, so it means that you can still have them. If you have any questions call the technical advisers at Dickson, they are pretty good, and not as kunty as everyone else. I can't find the number, but call 13 22 81, and ask to speak to a technical adviser.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...