Jump to content
SAU Community

Recommended Posts

why dont they have detection lines at flag points and cars hit rev limits that will see the cars slow and need to downshift and maintain 120km/h until then clear the flag point where the next green is shown.

Totally concur, with technology available why leave it to driver to judge lift when they know it leaves opportunity for another driver to lift less and catch them up, get them to select a flag mode. Obviously bit more complex than pit lane, possible multi flag sections require differing limits with transitions etc but they do have enough IQ & $s between them to work it out.

And Micky, put simply, you aquaplane because you exceed the rate the tyre can clear water - speed is definitely a variable

Yes hence why I said he needed wets, I think 65l per second vs about 30L for inters? Someone will correct me.

We don't know how quick he was going, the driver is considered to know the appropriate speed for the conditions. All great in hindsight.

Yes hence why I said he needed wets, I think 65l per second vs about 30L for inters? Someone will correct me.

We don't know how quick he was going, the driver is considered to know the appropriate speed for the conditions. All great in hindsight.

Inters disperse 25l per second brah

at the speed Jules went into the cul of that tractor I'd say he lost control of the car just as he went to turn and once the car slides in such conditions there is nothing a driver can can do

I feel for Jules though and his family right now.

Totally concur, with technology available why leave it to driver to judge lift when they know it leaves opportunity for another driver to lift less and catch them up, get them to select a flag mode. Obviously bit more complex than pit lane, possible multi flag sections require differing limits with transitions etc but they do have enough IQ & $s between them to work it out.

And Micky, put simply, you aquaplane because you exceed the rate the tyre can clear water - speed is definitely a variable

At the end of the day, with current technology a driver will ALWAYS be better in wet conditions. I have never seen a system like that that performs in the wet. It's always dangerous and would be worse in the wet.

Unfortunately the driver made a huge error and was going much too fast for the conditions. Such a horrible accident. But it's part of the sport, and it is bound to happen every now and then.

Don't know why they don't (some tracks do) just have cranes outside of the track that can literally pick the vehicle up and over the wall without going on the track. Make the whole recovery much faster and much safer.

Firstly I am not apportioning any blame to Bianchi in this accident...but I am wondering with technology what it is today why dont they have detection lines at flag points and cars hit rev limits that will see the cars slow and need to downshift and maintain 120km/h until then clear the flag point where the next green is shown.

Seriously the drivers tendency to speed through double waved yellows in V8 Supercars is terrible and F1 not much better. Has long frustrated me that FIA dont police it more heavily and a joke that in quali sessions drivers only need to demonstrate a lift of a tenth or two as acknowledging the yellow

Just need to deploy the safety car in the wet when the recovery vehicle is out. Double waved yellows is not enough.

looking at that gif, id be worried about the gap in the wall too, cause if truck wasnt there it almost looks like he would have missed the tyre wall and gone through the gap...

it was a horrible accident, rain fell, inters at the end of their life so prob dispersing less water, and a fast sweeping turn...

also the green flag surly shouldnt have been there

hmmmmaybe not, looks like the wall folds back, just not sure how far

Edited by MatthewT85

Sorry, i may have missed something, but why are people saying 'forza jules'?

Isn't he French? and driving for a Russian team?

Whats the relationship there?

Nando started it on twitter.

Edit for linky.

https://mobile.twitter.com/alo_oficial/status/518825831435489280

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
    • Wanted to follow up on this. Did you end up getting the M073? Still deciding on what to get between nismo m073-79 and plazaman.  
    • I was just watching these boys up in QLD AWD'ing their S13 too.  
    • Por que no los dos? At least my euro brawler is reliable - unlike the JDMs I've had. Sheraaz you look familiar, did you ever come to an SAU VIC meet aaaaaages ago?
×
×
  • Create New...