Jump to content
SAU Community

Recommended Posts

Hi All,

Listed as below.....low ballers will get no response.

Car is for sale with all my spares bar a spare turbo and the V35 Rays rims. Just needs a new motor!! :P $11K

I wont breakup the items from there lists either:

  • Sway Bars + Front and rear brace - $500
  • BC Coilovers - $750
  • Nismo ECU - $1,250
  • R33 GTR 324mm Brembo callipers and DBA rotors with a near new set of Hawk pads and a half warn set - $650
  • Works Bell Paddle Shifter - $300
  • Complete Black interior - $1000
  • Greddy sonic POD - $150
  • Suction pipe to suit 30/71 BB in standard housings....needs spacer for bush core - $500
  • Mishimoto radiator - $200
  • HDI FMIC including fan - $320
  • Greddy oil cooler + Greddy thermo Sandwich plate + Sensor and output - $450
  • Z33 LSD - $450
  • 3.538 ration front diff(match's Z33 ratio) - $350
  • Greedy informeter - $250
  • Takero's Carbon Fibre rear wing - $400
  • Custom front bar to suit ARX or AXIS....needs repair and spray - $300
  • Nismo exhaust, Decat front pipe, dolphin front pipe - $1,000
  • 610cc injectors, Injector harness and plenum spacer - $500
  • HDI EBC - $100
  • Standard H/F Turbo 30/71 BB core with supporting mods for bolt on(Will need a service) - $700
  • gearbox with Shift kit - $300

More parts to come - I'll take photo's of some of the items. PM me for more detail....don't be offended if I don't respond to low ballers!

All parts are in Sydney......Please note that some of the parts may take some time to get off the car.

cheers

Craig

Any idea what postage would cost to Adelaide for (or if you're even interested in posting them):

Sway Bars + Front and rear brace

Greddy informeter

So much more i'd love to buy.... funds too low though (that black interior would be a huge step up from the horrible tan i have now)

Cheers

Cam

Any idea what postage would cost to Adelaide for (or if you're even interested in posting them):

Sway Bars + Front and rear brace

Greddy informeter

So much more i'd love to buy.... funds too low though (that black interior would be a huge step up from the horrible tan i have now)

Cheers

Cam

I'll post.....it will be under $100 via ego.

I wont breakup the items from there lists either:


  • Sway Bars + Front and rear brace - $500 - SOLD
  • BC Coilovers - $750
  • Nismo ECU - $1,250 - SOLD
  • R33 GTR 324mm Brembo callipers and DBA rotors with a near new set of Hawk pads and a half warn set - $650 - SOLD
  • Works Bell Paddle Shifter - $300
  • Complete Black interior - $1000
  • Greddy sonic POD - $150 - SOLD
  • Suction pipe to suit 30/71 BB in standard housings....needs spacer for bush core - $500 - SOLD
  • Mishimoto radiator - $200 - SOLD
  • HDI FMIC including fan - $320 - SOLD
  • Greddy oil cooler + Greddy thermo Sandwich plate + Sensor and output - $450
  • Z33 LSD - $450
  • 3.538 ration front diff(match's Z33 ratio) - $350
  • Greedy informeter - $250 - SOLD
  • Takero's Carbon Fibre rear wing - $400
  • Custom front bar to suit ARX or AXIS....needs repair and spray - $300
  • Nismo exhaust, Decat front pipe, dolphin front pipe - $1,000
  • 610cc injectors, Injector harness and plenum spacer - $500 - SOLD
  • HDI EBC - $100
  • Standard H/F Turbo 30/71 BB core with supporting mods for bolt on(Will need a service) - $700
  • gearbox with Shift kit - $300

Update

  • Sway Bars + Front and rear brace - $500 - SOLD
  • BC Coilovers - $750
  • Nismo ECU - $1,250 - SOLD
  • R33 GTR 324mm Brembo callipers and DBA rotors with a near new set of Hawk pads and a half warn set - $650 - SOLD
  • Works Bell Paddle Shifter - $300 - SOLD
  • Complete Black interior - $600
  • Greddy sonic POD - $150 - SOLD
  • Suction pipe to suit 30/71 BB in standard housings....needs spacer for bush core - $500 - SOLD
  • Mishimoto radiator - $200 - SOLD
  • HDI FMIC including fan - $320 - SOLD
  • Greddy oil cooler + Greddy thermo Sandwich plate + Sensor and output - $450
  • Z33 LSD - $450
  • 3.538 ration front diff(match's Z33 ratio) - $350
  • Greedy informeter - $250 - SOLD
  • Takero's Carbon Fibre rear wing - $400
  • Custom front bar to suit ARX or AXIS....needs repair and spray - $300
  • Nismo exhaust, Decat front pipe, dolphin front pipe - $1,000 - SOLD
  • 610cc injectors, Injector harness and plenum spacer - $500 - SOLD
  • HDI EBC - $100
  • Standard H/F Turbo 30/71 BB core with supporting mods for bolt on(Will need a service) - $700
  • gearbox with Shift kit - $300
  • Like 1

I'll post.....it will be under $100 via ego.

I send that kind of stuff Auspost; it will come in under 100cm, and under 20kg.

Estimate will be around $30ish. ;)

Hey Craig,

I dont suppose you've got a harness adapter that is pre-pinned for an E-Manage Ultimate lying around as a result of your R&D efforts do you?

Haha, pre-pinned harness adapter?

They are all hard wired to the oem loom. How many do you think we have tuned so far Dunc? :P

Perhaps you could swap the entire harness, it isn't too hard. Much easier to cut yours up and wire in the universal harness though.

Haha, pre-pinned harness adapter?

They are all hard wired to the oem loom. How many do you think we have tuned so far Dunc? :P

Perhaps you could swap the entire harness, it isn't too hard. Much easier to cut yours up and wire in the universal harness though.

Couldn't remember if there was a 'small' harness between the full loom and ECU - figured it wouldn't hurt to ask :P

I have got a spare engine harness I bought a while back that does have the E-manage cut into it. I paid $100 for it if you want it.

P.S. You will still need to sort the EMU side though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...